RSSI_channel not visible in Tower app
@Leagle wrote: I am using an APM 3.1 connected to my ezuhf receiver via cppm. I can't find rssi_channel in the list of parameters that I can download from my APM. I'm on arduplane 3.4.2, so I believe...
View ArticleParachute Features and Functions in Arduplane
@Captain wrote: HI, All our landings are with Parachute, we do it with manula parachute, we have few questions before we switch to do it via Arduplane and PH1: This is a list of some features, we...
View ArticleClik here to view.
Help with anomaly on VTOL plane transition
@Shane_R wrote: After updating to the 3.7 firmware we are seeing an abrupt nose up condition after the ARSPD_FBW_MIN is reached during the Q_TRANSITION_MS. Were were able to lessen the problem by...
View ArticleLanding and loiter to alt weirdness
@Greg_Wood wrote: Was out doing some test flying today. For the most part things went great, but there are a couple things that confuse me: There have been a few instances on auto-land where the plane...
View ArticleMP Stucks at "Getting Param"
@matos100 wrote: Connected the APM 2.6 to the MP via usb and get stuck with the window "Getting Param" Posts: 2 Participants: 2 Read full topic
View ArticleIs it possible to change the elevator's plane?
@tipehugo wrote: Hi,I have a project which is to make a few tests.I want to make automatic plane’s climbing flights. Each one with a different rate climing with a fixed motor power.I need is the...
View ArticleActivate auxillary servo at specific waypoint
@anparkinson wrote: I want to drop something from my plane at a set waypoint using my Pixhawk but am struggling to see how to do it in the Pixhawk. Can anyone point me in the right direction? Posts: 1...
View ArticleTrims on different flight mode
@vib.mad wrote: I'm trying to fly my turbine plane (kolibri on Twister jet) with pixhawk 3dr. latest MP / plane 3.7.1 on PC/FC.everything works greats on ground and I can fly manual no problems. So I...
View ArticleTrying to control arduplane with joystick requires MAVLink MANUAL_CONTROL...
@Wieland_Beck wrote: Hello I would like to control my arduplane via my gamepad / joystick and It will not work because I keep getting this message in qgroundcontrol or other GCS Joystick support...
View ArticleQuadplane with V-Tail Setup
@aamadeuss wrote: Hey im Setting up a quadplane with V-tail, two ailerons and x quadcopter setup.is that connection right? Pin 1 = AileronPin 2 = Elevator ( VTAIL)Pin 3 = ThrottlePin 4 = Rudder...
View ArticleMotor runs when disarmed
@mpjf01 wrote: I am using the current version of Arduplane on a Pixhawk. I upgraded the "Hawk from Arducopter. I habitually keep a handwritten log of the installation and setup steps as I take them...
View ArticleMysterious Resetting of Flaperon Trim Values (Solved)
@jacques_eloff wrote: I have my quadplane setup with flaperons which, together with the inboard flaps, allow me to create camber over the full length of the wings for nice slow loiter. On a number of...
View ArticleWhich mavlink messages in each data stream?
@pauljatherton wrote: Hi, just wondering if there is a reference anywhere written to outline, which mavlink messages are contained in each data stream (I.e. those streams whose telemetry rates are...
View ArticleQuadplane, DO NOT USE 3.7!
@aamadeuss wrote: Had major issues in transition from qloiter to fbwa and back, use 3.6 !Will post logs soon. Posts: 1 Participants: 1 Read full topic
View ArticleClik here to view.
Compass Error in Airspeed sensor with built-in compass - Arduplane
@Captain wrote: HI, We have installed a new Airspeed with built-in compass, we are using Pixhawk and Arduplane. We did 2 flights: The first one was without before we did compass calibration, we got...
View ArticleMy quadranger refuse to hover
@keeyen wrote: This is my first try in quad plane. Basically follow the Quadranger example from the manual. I've double check the motor rotation and configuration. I've also completed ESC calibration...
View ArticleClik here to view.
Quadplane improve Yaw performance
@aamadeuss wrote: Hey Guys,my second quadplane had its qloiter maiden today. standart pids.Everything worked as expected, but the "yaw" performance is not good.its sluggy and the plane is not "stiff"...
View ArticleClik here to view.
SBUS problem with Arduplane
@ultrafuge wrote: @TridgeHopefully the right place to mention this issue: My Setup: Futaba T14SG + R7008SB in mode B connected to Pixhawk 1Arducopter 3.3.3: works with 12 channel FASSTest and works...
View ArticleClik here to view.
Reset of integral part of PIDs with mode change
@EShamaev wrote: Hello all, When reviewing logs after last few flights, I noticed that the integral parts of PIDs are reset to zero when mode of flight changes.Is this done on purpose and if so, then...
View ArticleQuadplane : cannot hold position at final landing
@ravenfire wrote: cannot hold position at final landing，when reaching final land alt，the vehicle just drifted away. Posts: 1 Participants: 1 Read full topic
View Article