SITL, first project, fast plane
@stundenblume wrote: Hello,I would like to try my first steps in SITL. I managed to compile and fly the test plane some rounds.Now I would like to use a different airplane and simulate a fast jet,...
View ArticlePixhawk not responding to Servo's
@Pranay_Jhunjhunwala wrote: Hello,I'm facing a problem with the response of servos from pixhawk.I am using a pixhawk with arduplane 3.5.2 firmware loaded.I connected the BEC to aux5/6 and a servo to...
View ArticleClik here to view.
Throttle drops in non-MANUAL modes
@Georacer wrote: Hello everyone, I have set up a gas plane using Pixhawk and Plane 3.7.1. I have trimmed my throttle to hold the desired idle level, while in MANUAL mode. However, when switching to...
View ArticleSerial with pixhawk ?!
@semo wrote: hi all I am here to ask about the ability of inputting Serial Data to pixhawk and send it to GCS Missionplanner and send Serial data command to pixhawk to output for sensor ? Hope this...
View ArticleClik here to view.
UAV-3000 V-Tail Setup
@yak-54 wrote: Hello All trying to set a new plane uav-3000 ( V-Tail ) so i plug one side into port 2 and the other in to port 4 and is this image right Posts: 2 Participants: 2 Read full topic
View ArticleCAM_FEEDBACK_PIN output 3.3V when it should not
@lanzo wrote: I have a plane with Pixhawk where I use the shutter throught a circuit with 2 transistor, it works perfectly, now I want to use the CAM_FEEDBACK_PIN feature with a cable I made for the...
View ArticleClik here to view.
I search to collect the angle of attack or the slope, is it possible?
@tipehugo wrote: Hi , I have a major question , it could be the last if it works ! Actually we have access to the pitch , but I also need the angle of attack, is it possible ? Posts: 5 Participants: 3...
View ArticleAppropriate mode selection for elevator over-write
@oeldad wrote: I'm trying to dynamically set the maximum allowed deflection of the elevators by changing the vehicle parameter RC2_MIN (using an Odroid to connect to a pixhawk through the telemetry...
View ArticlePixhawk +m8n wrong home altitude
@Shark-357 wrote: Hi all. Im building my new mini talon and have come to the big problem, home altitude is the same as ASL altutude, until i get the GPS lock the HA is displayed correctly, but as soon...
View ArticleTECS tuning settings completely instable
@Maarten_pa0mhe wrote: The Ardupilot firmware project is the best initiative I have seen in years. My problem is not the firmware but my understanding of the tuning. Already for months, and with...
View ArticleClik here to view.
Mapping Mission with APM:Plane - Survey(Grid) works with APM:Plane?
@Andrea25 wrote: Hi,First at all: happy new year (= I would like to ask: the Auto WP>Suvery (grid) option on the Flight Plan screen on Mission Planner, works well also with fixed wing aircraft?I am...
View ArticleClik here to view.
TECS - Plane - Which one is used in auto waypoint mission?
@Andrea25 wrote: Hi,This is my second topic of the year I would like to ask something about TECS of APM:Plane.There is something that I think is not written on the wiki. 1)What is this?I searched on...
View ArticleSending a new Home Does not change origin
@jfint wrote: I'm flying in terrain that changes a lot, I fist noticed one day while flying that I had a constant altitude error that the autopilot never closed on. I didn't think much of it, until...
View ArticleBuilding Pixhawk using Eclipse with old java
@egonzalez01 wrote: Hello,I'm new to this, and I'm trying to build pixhawk using eclipse... but I have an older version of java on my computer and I'm not allowed to update it. Is eclipse the only IDE...
View ArticleHIL on Pixhawk 3.7 Plane
@Studentnr1 wrote: Did anyone get HIL working with XPLANE on the 3.7 firmware, could we fix the issue by using smaller serial buffers? Posts: 1 Participants: 1 Read full topic
View ArticleJSBSim not compiling
@Maarten_pa0mhe wrote: I'm trying to run ArduPlane in SITL on a native debian based Linux system (Ubuntu 16.04LTS)I followed the tutorial in http://ardupilot.org/dev/docs/setting-up-s$However the...
View ArticleClik here to view.
Quadplane: cannot land in auto mission do the vtol land
@vitsunhoo wrote: my quadplane cannot land in automission in vtol land, it just hover there ,the missionplanner show the Qplane is landing,but the plane is still hover ,i switch to qhover still cannot...
View ArticleCamera Exterior Orientation from 3DR Log file
@Achyut_Rao wrote: Hi, Is there are utility (apart from the geotagging tool within MP) to extract the aircraft attitude (omega, phi & kappa). We have started to use Simactive Correlator 3D...
View ArticleArduplane and tailsitter VTOLs
@wazoo22 wrote: Good fun going on over in RCGroups, VTOL thread, with the little old KK2.1.5 board, Happy Sunday's excellent software, and Ran's equally good documentation. But the board is limited. I...
View ArticleCompass onboard calibration with Pixracer/Plane 3.7.1
@vadim wrote: Is onboard mag calibration supported on Pixracer? I can do "live calibration" for all 3 compasses OK. However, when I try to do onboard calibration, several issues happen:1. Mission...
View Article