4.1 Beta [Dev Build] Issues
@craigy72 wrote: Hello, I have updated to 4.1 Beta and have come across a couple of issues; When using the VTX control, it is working however the mw in the OSD is not accurate. It states that is set...
View ArticlePlane fly accuracy
@hassani wrote: Hi dears, What is the accuracy of the flight control in plane mode in the best situation, and particularly the accuracy of the plane for holding the height? Thanks Posts: 1...
View ArticleArdupilot Mission simulation
@furkangunduz wrote: image402×534 175 KB ı am trying simulation . plane doesnt follow correctly my waypoints .How can ı fix this or do you guys suggest me something diffirent ? Thank you for your help...
View ArticleCamera Angle Setting
@Fugazi wrote: Is there anyway to set the angle the camera is at with respect to level flight ? Mini Ar wing has the camera pointing down 10 degrees so the HUD artifical horizon is too low? Thanks...
View ArticleElevator doesn't work after launch
@gokbeykeskin wrote: Everything works fine on the ground. But few seconds after the launch, elevator doesn’t work and plane crushes. We tried it twice with different pilots but got the same result. We...
View ArticleAirspeed sensor calibration sensitivity
@Hidayet_Dursun wrote: Hi, I am working on a fixed-wing UAV and my airspeed sensor is digital MATEK 4525DO. I have calibrated the sensor with the AUTO_CAL parameter and the ARSPD_RATIO value fell...
View ArticleEkf3 warning on the way back from 9km away trip and lost control and crash on...
@xixijoe wrote: The plane warns ekf3 active sometimes and head to the wrong way after under RTL mode. I struggled for a while and lost control while I switch to FBWA. and crash even I switch to RTL...
View ArticleMajor Inflight 4.1 Dev Issue - EFK3 Issue?
@craigy72 wrote: Hey All, I setup a mission in mission planner and went out for a flight this evening. Upon reaching my destination, I decided to hit RTL to bring her home. All was going well and then...
View ArticleMid-air pixhawk reboot
@Dork-knight wrote: Hello. A few days ago we were flying our plane. However, in the mid-air we lost both telemetry and RC connections to plane for a few seconds. We suspect that pixhawk rebooted...
View ArticleEkf3 warning on the way back from 9km away trip then lost control and crash...
@xixijoe wrote: Hello Everyone, Can I have some help here? The plane warns ekf3 active sometimes and head to the wrong way after under RTL mode. I struggled for a while and lost control while I switch...
View ArticleTakeoff in FBWA mode – Does not rotate (pitch)
@Marco65 wrote: I saw a similar post dated August 2017 where I found some infos . I suspect the problem may be PITCH2SRV_P value but I’m not sure about it (which could be the “starting” value and also...
View ArticleNo connection with my Radio Telemetry with MissionPlanner
@batu wrote: Hey Guys, i have a problem i can’t connection with my Ground telemetry on MissionPlanner but i tried another software(Qgroundcontroller) on my phone it connects directly asking without...
View ArticleRfd900x modems connect but no communication
@Benc wrote: Just got rfd900x modem and txmod jr bay module . They both show solid green but no rc commands going out and no telemetry coming back . This (air side) is connected to matek h743 wing fc...
View ArticleArduPilot (4.1.0beta) QuadPlane - QGroundControl Waypoints missing VTOL
@twobit wrote: Hi All, I have a working QuadPlane (4+1) and am wanting to migrate to a tablet for waypoints and have access to Apple and Android. I know there is a beta of MissionPlanner for Android...
View ArticleDataflash log corrupting after aggressive control inputs from autopilot
@d_larcher wrote: Hi all, We have observed three separate instances of dataflash logs being corrupted after aggressive control inputs commanded by the autopilot in a quadplane flight configuration....
View ArticleNumber of GPS sats
@Fugazi wrote: Not really a ardupilot question but someone here might know! For some reason if you set up the gps via ublox, enable galileo and gps etc etc, whatever I do I get 12 sats wherever I go...
View ArticleWhat is the difference between different logging backends (File, MAVlink,...
@gpetty wrote: I would like to enable routine logging of flight data from my Cube Orange onto its SD card in case telemetry gets lost during flight, but I’m not sure what the significance is of the...
View Article"+" Quadplane configurations
@davwing wrote: (topic withdrawn by author, will be automatically deleted in 24 hours unless flagged) Posts: 1 Participants: 1 Read full topic
View ArticleSeeing ~2 second periods of bad IMU/GPS/orientation data in log visualization
@David82 wrote: I normally fly for 30 mins or less and put the plane away and have had no issues. Today I left he FC on for 50 minutes and only flew 3 ~5min flights during that time. For some reason...
View ArticleI cannot build ardupilot on cygwin
@Erkam_Sahin wrote: I’m trying build arduplane on cygwin but when i configure the code for CubeOrange i get the error. $ ./waf configure Setting top to :...
View Article