@gokbeykeskin wrote:
Everything works fine on the ground. But few seconds after the launch, elevator doesn’t work and plane crushes. We tried it twice with different pilots but got the same result. We tested the receiver and transmitter from a far distance, we tested the servos on full throttle while same propeller is on the plane. Everything seems fine on the ground. I couldn’t find anything weird on logs. We feed the pixhawk 2.4.8 with 50 amp esc’s 5amp bec. We will use a 60 ampere esc and a power module next time but I can’t make sure that the problem is with the current or not and we don’t want to launch again before figuring out what’s wrong. Here is the flight log and video. Any thoughts?
https://drive.google.com/drive/folders/1LFuYLRYH3R5G1HTxhPnNxTHUHEI_gMkl?usp=sharing
Posts: 4
Participants: 2