Minimal data exchange rates for SITL
@Albcem wrote: Hello all, I am experimenting with SITL of a quad-plane on XPlane 9 & 11, and I observe that while controlled flights are possible I would not qualify them as smooth or reliable...
View ArticleClik here to view.
Problem Getting NMEA Strings Out a Serial Port (Location Data Zero)
@cambull wrote: Hi. I have a Matek F765-WING FC that I connected to, among other things, a UBLOX M9N GNSS receiver and a 900MHz serial telemetry link. The FC reads the GNSS location properly, as...
View ArticleTailsitter dual motor elevons not working..!..
@fares_Al_Dhaheri wrote: Hello , I am a new bee in the ardupilot world and interested in building uo my tailsitter dual motor non-vectored flying wing. I am using mini pix v 1.1 Trying to get working...
View ArticleHow to use external imus?
@liuyuhan wrote: How to setup for matek h743 wing using exteral icm20608 imu? I can’t find any related methods to setup external imus in the ardupilot docs. Is there any one who can help me with this....
View ArticleClik here to view.
Division by zero issues with SCALING_SPEED and SIM_WIND_T_ALT parameters
@KimHyungSub wrote: Hello, While I tested ArduPlane, I found two division by zero issues. Just in case, I would like to report details about the issues. param set SIM_WIND_T_ALT 0 image916×330 20 KB...
View ArticlePlane 4.1 beta - rough ETA? is there a forum to discuss it?
@dale2020 wrote: I’m not daring enough to use Plane 4.1DEV. I’m holding out for 4.1Beta1. Anyone have any insight into a rough ETA until it’s released? Is there currently a forum to discuss it? Posts:...
View ArticleNeed help crash log review of a giant T-28 Trojan
@RizHass wrote: I need help to diagnose the log file (https://www.dropbox.com/s/87v1430lz3yb5la/00000002.BIN?dl=0) of a gracefully flying T-28 Trojan ( Previous week video:...
View ArticleQRTL instead RTL below certain altitude
@Lorenzo_Pessah wrote: Hello! Yesterday i had a battery failsafe (set for RTL) while at 1.5m altitude with my quadplane. The pixhawk switched to RTL instead of QRTL. I think I have all the parameter...
View ArticleClik here to view.
Plane 4.1.0 beta
@tridge wrote: ArduPilotPlanePorter750×316 48 KB I’m delighted to announce the release of the ArduPilot Plane 4.1.0beta1 release. This is a major release, with a lot of changes across almost all...
View ArticleSettings for DJI Air Unit to communicate with Furious FPV F-35?
@vincecate wrote: I am trying to switch from a iNav/F-35/DJI to ArduPilot. I have the latest stable Ardupilot/Plane for F-35 loaded on the F-35 and in Mission Planner it tips when I tip the F-35 and...
View ArticleTakeoff first waypoint, switch to Auto in flight
@Gabriele wrote: What if my mission first waypoint is TAKEOFF and I actually take off in FBWA an then switch to AUTO while already in the air? Is takeoff waypoint skipped if the altitude is higher...
View ArticleQAUTOTUNE Failed
@DavidK123 wrote: We are making VTOL. wing span 2m, mtow 7.5kg,T-MOTOR 4014, FLAME 70A ESC, 16x5.4 prop, FC(pixhawk cube, V5+, nora) plane 4.0.9 We are referring to “Tuning Process Instructions”....
View ArticleClik here to view.
How to change the ROI 'Pan' reference heading in Ardupilot Plane
@Muhammad_Amir_Khan wrote: Hello everyone, I am new to ardupilot. The thing is I tested ROI at SILS (Software in the loop simulation) in which ROI, ‘Pan’ takes reference from the current plane...
View ArticleIssues with arduplane v 4.0.9 and channel 3 output
@Supermagnum wrote: Hi, I am using arduplane v 4.0.9. I cannot calibrate my ECS, its a Volantex. Its on channel 3. I am getting reaction on channel 3 input, and output. This is clearly visible on the...
View ArticleUncontrollable when switching Flightmodes
@Fl3xi wrote: Hi Im using Arduplane V4.1.0 When im flying normal in the manual mode everything works allright, but when I want to change the FlightMode to Autotune or FBWA the plane either steers...
View ArticleClik here to view.
Vtol tiltrotor quadplane
@Prathamesh_Patyeker wrote: hi guys need your help with qgroundcontrol , i cant find Generic Quadplane VTOL Tiltrotor under airframes in qgc ! can’t even find it under vtol tiltrotor section in...
View ArticleAHRS EKF2 vs EKF3
@depeurvince wrote: Hi, I enabled EKF3 and AHRS_TYPE 3, should I disable EKF2 or it still have a usage? thanks Posts: 4 Participants: 2 Read full topic
View ArticleAdding RLL_RATE_D to OSD
@Matthias_Hryniszak wrote: Hello, I’d like to add RLL_RATE_D and PTCH_RATE_D to OSD5. There are by default just 8 parameters and one of them is TUNE_PARAM which I don’t really need right now but...
View ArticleRC IN (SBUS) Stopped working after switch to plane 4.0.9 From copter
@Callum_ONeill wrote: This cube Black was last used as a bench tester for Quadcopters, After flashing new plane 4.0.9 Firmware to it, the SBUS signal going through the RC IN is no longer recognized by...
View ArticleMissing SERIALx_PROTOCOL choices
@Benc wrote: Loaded beta copy of arduplane 4.1 onto a Matek h743 wing FC . Interested in vtx smart audio control and CRSF . I enabled the vtx control and all the choices come up after reboot . Power ,...
View Article