Mg90s servo connecti̇on pi̇xhawk radi̇oli̇nk
@SBK061 wrote: Hi everyone. I am new here. I have a issue. Mission planner is not controlled my servos. I have a FLYSKY FS_TM10. I saw the servos pages on Mission planner and tools are changed value...
View ArticleClik here to view.
Inertia Moments - IMU Pixhawk
@Pau4578 wrote: Hi, I have a problem and maybe you can help me. I wanted to calculate the inertia moments of a VTOL and did a bifilar pendulum test. I logged the IMU data from the pixhawk (gyroscope...
View ArticleClik here to view.
"SERVOn_FUNCTION" = 46 and 47" does not appear
@mBicer wrote: Hi guys, i’m building a “quad plane” with have only 4 tilt rotors. I need to set “SERVOn_FUNCTION” to 46 - 47 - 75 - 76 for the rear and front servos. But mission planer > Full...
View ArticleClik here to view.
TAKEOFF Mode - first attempt with odd results
@UnknownPilot wrote: I finally wanted to test TAKEOFF mode (without compass, by the way), but things didn’t go exactly as planned. According to https://ardupilot.org/plane/docs/takeoff-mode.html, I...
View ArticleClik here to view.
Telemetry stuck in red light
@tommm wrote: i have holibro telemetry, but it only stuck in red light when connected into PC via usb.how to fix it? image1366×768 73.2 KB image1366×768 64.6 KB Posts: 1 Participants: 1 Read full topic
View ArticleRequired NMEA sentences
@andyp wrote: Which NMEA sentence(s) are required by Ardupilot? Does Ardupilot autoconfigure the GPS? Can I turn autoconfigure off? Can I just send GGA? Or do I need VTG and RMC as well? My GPS puts...
View ArticleClik here to view.
Mini Talon Auto TakeOff
@Burak_Yildirim wrote: Hello, while trying to take off automatically with Mini Talon, the plane does not take off. There is no problem with FBWA mod takeoff. How can I fix this problem for auto. video...
View ArticleFeature request for a Glide mode as a flight mode
@ninja_zx11 wrote: Hi all, I couldn’t find any mode in which I can Glide back to my launch position from high altitude without using any motor power where plane maintains direction and min airspeed by...
View ArticleWho is the best SITL mission planner coder?
@Shef wrote: Who is the best SITL mission planner coder? In other words who has the most experience at making features for SITL in mission planner? And don’t be shy, if you think it’s you then say it!...
View ArticleClik here to view.
X Plane 9 SITL support
@Saad_Ur_Rehman_Aftab wrote: Hi all, I am interested to know whether X plane 9 can support SITL as under network connections there is an option to transmit data, however I am not able to initiate the...
View ArticleProblems with SITL
@Corrupt wrote: So I’ve been trying for hours to get this simulator working. Not sure if it’s just very terrible instructions or I’m missing something. I’m on windows 10 and with Cygwin I get: $...
View ArticleMotor twitching after arming - DSHOT/BLHeli issue?
@UnknownPilot wrote: After upgrading to the latest (dev) version, I found that apparently some changes have been made to BLHeli/DSHOT-related parameters, for example SERVO_DSHOT_ESC seems to be a new...
View ArticleMAVlink Packet routing issue with more then one link and GCS
@Andre-K wrote: For redundancy out plane has a Groundstation SYSID 254 on a radiolink on SERIAL1 and another GCS, let’s call it SYSID 252 on another radiolink on SERIAL2 (the radiolinks are completely...
View ArticleIncorrect Time stamps
@Jed_Freeman wrote: Hi I am having an issue with incorrect time stamps with Plane 4.0.9 and Cube Orange The setup is Emlid M2 GPS on GPS1 and two cameras an RX1R Mk2 servo controlled and a D4K NDVI...
View ArticleHow to connect voltage and current sensor on the second power port of cube
@supercurare02 wrote: Hi, i would like to use a second mauch sensor to have voltage et current datas for a independant payload battery. Need i just connect current and voltage wires + ground on the...
View ArticleTakeoff magnetometer and magnets
@sandre wrote: I am using F765Wing on DartXL. Because plane has magnets for fixing cover close to GPS place (about 10sm), I disabled magnetometer. But when I using Takeoff mode, plane turn in more...
View ArticleOsd rtc does not adjust with offset
@luckyflyer wrote: Using 4.1Dev with DJI goggles. BRD_RTC_TZ_MIN has no effect on displayed time. Posts: 1 Participants: 1 Read full topic
View ArticleUnderstanding Yaw Control During Quadplane Transition
@Nathaniel wrote: Hi Everyone, ardupilot/pixhawk4/quadplane I am trying to better understand what the flight controller is doing in terms of yaw control during the transition, from QLOITER to CRUISE...
View ArticleExif Data in photos
@Steven_Young wrote: I know when you geotag images using dataflash the csv file shows Speed Direction Tilt Yaw and Roll is this data automatically assigned to the geotagged images? If so how do I...
View ArticleLight Weight Telemetry G-frame frequency
@andyp wrote: Hi I am using light weight telemetry. The G-frame is sent at 2Hz...
View Article