Help needed trying to install mission planner on win 7
@tkreg1 wrote: Getting handler errors tried installer.exe did not work tried missionplanner.exe and used MSI file all did not work I was successful to install on 2 nd computer win 10 and another...
View ArticleClik here to view.
EKF inconsistent problem
@hosein_gh wrote: I have a problem with my new wing Everytime when i try to arm my wing it says EKF2 Yaw Inconsistent by XX degrees error or EKF2 roll Inconsistent by XX degrees error This is how i...
View Article4 elevons with crow
@ufoDziner wrote: Hello, I’m attempting to setup one of my gliders with Ardupilot. It is a plank with 4 elevons (2 per side) that I use in crow mode for landing. Can someone point me to some guidance...
View ArticleBeginning of pixhawk
@Balaji_Karthick wrote: Hi I’m New to PIXHAWK so i need to learn how to start with PIXHAWK Posts: 3 Participants: 3 Read full topic
View ArticleConfiguration of the trigger cable on the mini pix for canon a2400 through chdk
@Prof_Stephan wrote: hello friends, I have a mini pix from Radiolink and I am trying to use a triggger cable with a canon a2400 camera, through CHDK, but I am not successful. the trigger command by...
View ArticleGain scaling based on throttle position
@ufoDziner wrote: Hello, I’m interested in gain scaling based on throttle position. This will be on a glider, so I don’t actually have a motor. It is possible that I’ll add an airspeed sensor later...
View ArticleClik here to view.
Error message trying to download Dataflash log
@Doppler_uav wrote: Hi all, When I try to download dataflas logs from my Pixhawk1, I get this message: error log784×436 80.2 KB Does anyone know what does it mean? Firmware is Arduplane 4.0.7 Thanks....
View ArticleClik here to view.
Mini pix radiolink + trigger cable + chdk (canon a 2400) problem resolved
@Prof_Stephan wrote: IMG-20201225-WA00191280×960 83.3 KB IMG-20201225-WA00181280×960 129 KB IMG-20201225-WA00171280×960 132 KB IMG-20201225-WA00161280×960 174 KB Friends, I managed to shoot the camera...
View ArticleClik here to view.
QuadPlane Frame support
@adam wrote: ArduPlane VTOL Can it support the frame in the picture No elevons Screenshot_20201227-0029431079×1027 208 KB Posts: 4 Participants: 2 Read full topic
View ArticleSimulating Pixhawk GPS here RGB LED states
@igor86u wrote: I saw this page https://ardupilot.org/copter/docs/common-leds-pixhawk.html I see the author changing all RGB LED states at will. I would like also to do that. The reason for this is...
View ArticleIs Optical Flow Sensor useful for a fixed-wing?
@gplante2 wrote: Hi, I’m new to Ardupilot/Arduplane and I’m currently building my first project using it. This is a fixed-wing (a Binary 1200mm from SonicModell) with a Matek H743-Wing FC with...
View ArticleFrsky Variometer HP at Mateksys F405
@Michael.N wrote: Hello, I´m using: Frsky Taranis QX7 ACCESS (OpenTX 2.3.10, ISRM-N 1.1.1/2.1.0EU) Frsky ARCHER RS (1.2.0/2.1.2) Matek 405-Wing (arduplane_with_bl latest about 20.12.2020) Beitian...
View ArticleClik here to view.
Strange Current Issue on Matek F765 (3S vs 4S)
@craigy72 wrote: Hey All, I’m trying to get my current sensor more accurate but I’m running into a strange issue. When running a 3S battery, the current sensor is pretty good. At about 40pc throttle...
View ArticleObstacle Avoidance in AltHold
@gxryy wrote: Hello community members, I understand that QuadPlane firmware is based on ArduPlane firmware, and that collision avoidance is available on ArduCopter. I can’t seem to find documentation...
View Article4.1.0dev SBUS out rate?
@Simon_Exner wrote: Hello, first of all I read the docs to be a bit conflicting on this: for plane 4.1.0dev there docs say BRD_SBUS_OUT: SBUS output rate and SERVO_SBUS_RATE: SBUS default output rate...
View ArticleFlyaway only averted by manual intervention 4.0.5. EKF position drastically...
@Daveemtb wrote: I had a serious issue during a BVLOS flight where the EKF position departed drastically from the GPS position. An anonymized (locations changed) logfile can be found at:...
View ArticleMateksys F405-SE setup
@Silver-Sass wrote: Hello friends! Happy New Year! I have been involved in FPV aviation for over 5 years, building and setting up over 10 FPV aircraft. Used APM, Pixhawk, Omnibus controllers, etc. I...
View ArticlePreflight check of Gas Engine & Flt. contols for VTOL plane
@Skiesway wrote: System: VTOL fixed wing generic standard airframe 4 electric motors for takeoff and landing 1 Gas engine for cruise cube black controller Herelink Qgroundcontrol I need help with...
View ArticleAliron servo jittering
@kader wrote: when connected RFD900X then aliron servo jittering but at disconnected time no jittering, how can solved it, plz help me Posts: 4 Participants: 3 Read full topic
View ArticleAccidents encountered in auto takeoff mode
@sammeyil wrote: hellow everyone,i have use auto takeoff mode many times.but I found sometimes the throttle value cannot be reached.alawys abolt get a half.so I can only end it,and try again,until...
View Article