@Simon_Exner wrote:
Hello, first of all I read the docs to be a bit conflicting on this:
for plane 4.1.0dev there docs say
BRD_SBUS_OUT: SBUS output rate
and SERVO_SBUS_RATE:
SBUS default output rate
both control the SBUS-out rate. On my revo-mini FC, i can only see the SERVO_SBUS_RATE and when I change it (tested 25,33,50,100,111), the only resulting output rates (measured with oscilloscope) are 25Hz and 50Hz (I need 111Hz or at least 100Hz). Any ideas?
Posts: 7
Participants: 2