Clik here to view.
Motor arming issue (continuously beeping) on pixhawk and mission planner
@Shubham_Thakur wrote: Hello, I am building a arduplane on new skywalker aircraft. Configuration: Motor:- T-motor AT 2820 830kv ESC:- T-motor T60A 400Hz FC:- Pixhawk 2.4.8 GS:- Mission Planner tx/rx:-...
View ArticleQuadplane performance in Hover, loiter and stabilize mode
@stefymtb wrote: Hello, This is first time for me setting up a quad (even if it is a plane). Yesterday i did qautotune on roll axe. I am not sure it did a good work. How can i check it? What are the...
View ArticleCUBE BLACK resets to default parameters intermittently
@Jason_Ross wrote: Hello all, I was using a CUBE BLACK, serial number CU11A9610030, running Arduplane 4.0.0 for QUADPLANE. After initial vehicle setup, USB power was disconnected from the vehicle to...
View ArticleArduPlane 4.0.1 Custom Flight Mode Help
@Ncookie wrote: I am attempting to create a custom flight mode for a plane running 4.0.1 ArduPlane software. I’m familiar with the environment setups and have everything ready to compile my own...
View ArticleSelect LAND from GCS
@TheTroll wrote: Hello! There’s a possibility to select Land flight mode on qgroundcontrol when flying. What happens in this case. I assume my plane go landing. But what destination point would be?...
View ArticleClik here to view.
Spike on desired pitch
@dcamatti wrote: Hello, I saw strange spikes on the desired pitch graph during auto mission. It seems that real performances are not affected at all looking at the logs situation seems worrying....
View ArticleClik here to view.
Pixhawk 4 mini Servo actuation
@DtCc0914 wrote: I am currently working on a project creating an autonomous glider. As of now, we have communication between mission planner and pixhawk 4 mini via holybro telemetry radio. The problem...
View Article**crash** ev:motors_emergency_stop
@skyveyor wrote: Hello All, I could use a little help determining what caused a crash of a VTOL Drone. It was the maiden flight. The plan was to test all of the qmodes and if they went well initiate...
View ArticleIncrease servo deflection in fbwa mode arduplane
@kishang56 wrote: Hello, I am using arduplane and pixhawk 2.4.8 for my plane. Serves are deflection very less in fbwa mode as compared to manual mode. Because that the plane is gaining height very...
View ArticleClik here to view.
Precision landing in plane
@Paola_Casabona wrote: Hello, I have a quad plane (VTOL X8) .I implemented a precision landing in this drone using IR-LOCK beacon and a pixy camera but it doesn’t work well. I saw an erratically...
View ArticlePPM output possible somehow?
@iforce2d wrote: Is there any way to get PPM output from Ardupilot? I want to take the roll, pitch etc outputs and do my own mixing with an arduino, to allow complex custom control surface mixings,...
View ArticleNo rc receiver message
@adcam wrote: hi I flew today : heron multiplex - taranisx9d - pixracer r15 mrobotics - arduplane 4.0.3 I had 4 times " no rc receiver " on the lua script on taranis x9d I can’t see it in the log Can...
View ArticleTelem1 vs Telem2 getting messages from Pixhawk
@brmyhre wrote: We’ve been having an interesting issue when dealing with receiving MAVLink messages when using ArduPlane and a Pixhawk 2.1 Cube. We have a device that we want to use essentially as an...
View ArticleProblem with RC OVERRIDE in fixed wings frame
@Hovhannes_Ayvazyan wrote: (topic withdrawn by author, will be automatically deleted in 24 hours unless flagged) Posts: 1 Participants: 1 Read full topic
View ArticleArduPlane 4.0 Twin Engine Servo Output Mapping
@Ncookie wrote: I’m running a twin engine setup and so I have Throttle Left and Throttle Right as servos 1 and 2, ailerons as servos 3 and 4, and an elevator on servo 5. My RC is mapped as Channel 1...
View ArticleClik here to view.
Use Tilt Servo as Aileron in Cruise Flight
@stahl wrote: Hi everybody! I wonder if the VTOL in the pictures below can be controlled by Ardupilot’s QuadPlane in all flight phases. This aircraft has no dedicated ailerons. It uses the wingtip...
View Article"Save the plane" routine in my custom flight mode?
@linuxguy123 wrote: I’m writing a custom flight mode. I’m looking for a routine to call to save my plane if my flight mode finds the plane to be in trouble, ie a bad orientation, low airspeed or low...
View ArticlePixracer ESP8266 arduplane log download timeout
@Alexey_Degterev wrote: Hello. I use pixracer with esp8266 telemetry module. 1-2 years later i use pixracer with arducopter and can download logs via wifi bridge. Now i return to hobby with zohd dart...
View ArticleESC Telemetry not working
@tiana wrote: Hello, I have problem with ESC Telemetry i do everything like is explained in this tutorial https://ardupilot.org/plane/docs/common-dshot.html but in APM not appeared esc1 parameters. I...
View ArticleFrSky SPort Passthrough (OpenTX) not working
@tiana wrote: Hello, I have problem with FrSky SPort Passthrough (OpenTX), its not working. when i switch to Frsky SPort Taranis start discover couple of sensors. But when i switch back to 10 FrSky...
View Article