Blheli_32 Esc for fixed wing
@Doppler_uav wrote: Hi, Wich Escs would you recommed for a Twin-motor fixed wing? T-motor F35A BLheli_32 or T-motor AT 55A? I don´t know if the F35A (copter esc) will work OK on a plane. Posts: 2...
View ArticleGPS Glitches Plane
@Jed_Freeman wrote: Hi I am getting momentary GPS glitches at varying intervals during my flights, the system is a pixhawk2 with Here2+ RTK during the glitch which only lasts about 1 second the HDop...
View ArticleHow Customize Arduplane With Navio2?
@SFY34 wrote: Here, We have a project like plane but we need to add a some motors and servos .And also our plane not fly also we try to configurate the ready embedded codes . So how can we customize...
View ArticleCompasses are completely useless, used to work
@evranch wrote: I’ve flown the same Pixhawk + GPS and external compass setup for years. I moved it to a new wing and updated to the latest Arduplane version a couple days ago. The old version was a...
View ArticleClik here to view.
GPS update rate period spikes higher in Arduplane 4.0 compared with 3.9.3
@AlleIta wrote: Hi, I updated my Arduplane from 3.9.3 to Arduplane 4.0.0 on an OmnibusF4 V3 board (without current sensor) equipped with Beitian BN-880 gps. After the update I noticed from the...
View ArticleHardware in the loop is there still such a thing for arduplane
@Brian_Duvall wrote: Hello all, I have been trying to get arduplane working with xplane 10. I see that this used to be working back in 2015. From the conversations on the forums it sounds like it just...
View ArticleClik here to view.
DShot ESC telemetry - voltage and current values choppy
@maciek252 wrote: I’ve setup the DShot ESC telemetry in a twin motor plane. Pixhawk 2.4.8 DShot ESC: one is Racer Tattoo 52A, another one of a different type (I don’t remember) ArduPlane 4.0.3 fmuv3...
View ArticleArdu Noob with an arming question
@mtnmikev wrote: Hello all! New here, building my first Ardu rig and it’s a VTOL. So I’ve done a ton of reading and one thing I have yet to see is anything on arming? Can anyone point me in the right...
View ArticleStraight Trajectory implementation
@S_Vinha wrote: Hello guys, I’m trying to implement a simple trajectory for my plane where it performs a trajectory like a rectangle, but in the small sized paths it performs a curve. Anyone got an...
View ArticleQuadplane tips and hints
@hwurzburg wrote: Having recently built and flown several different kinds of Quadplanes, I thought that I would add a hints and tips page to the wiki due to some unique facets of Quadplane that are...
View ArticleServo activation from Mission Planner
@jsalvador wrote: I’m interested on being able to activate an auxiliary servo from both the RC transmitter and Mission Planner at the same time, for what I have seen: If I set the servo output to 0...
View ArticleIssue with log review in Pixhawk
@Kubo wrote: Hello everyone. Me and my coleagues wanted to log data from pixhawk to an SD card using “logger on” command in Mission Planner. After the logging we wanted to download data to computer...
View ArticleClik here to view.
Crash after a loiter
@juvinski wrote: Hi guys, after around 50 flights, I had a several crash with an airplane. After the takeoff, there was a loiter from 30 mts to 150 mts, and insteado to gain altitude the airplane dive...
View ArticleClik here to view.
Lua Interface: Problem getting altitude data
@BAmercury wrote: So I have a lua script and all I want to do is get the vehicle altitude. Currently in Arduplane SITL, I call the function: ahrs:get_hagl() and it continues to return nil, and I am...
View ArticleOmnibus F4 pro GPS to Telemetry-port
@RDPOLL wrote: Hi there I unintentionally destroyed the connector and the solderpads of the GPS-port. As far as I know is this serial 3 (correct me if im wrong). My question is: is it possible to...
View ArticleHow does one send mavlink message from library script?
@sdeal3 wrote: Hi, I am currently working on a project using the latest Arduplane 4.0 codebase that requires me to make a custom script that will send MAVLink messages from the mRo Pixhawk to a...
View ArticleCompass not working on f405
@mtnmikev wrote: Hello, I have a matek M8Q 5883 connected to DA2 CL2 on the f405 wing board and compass enabled in Mission planer. When I enabled and wrote param it started working. Power cycled and...
View ArticleCompass variance errors and crash with Skywalker X8 Quadplane
@darrell wrote: After a couple of successful manual flights I decided to try a simple auto mission with my quadplane. It took off fine, and heading to waypoint one where it began to circle a few times...
View ArticleClik here to view.
VTOL Plane Project - Follow our journey!
@Kungsfiskare wrote: Hello! We’re currently working on converting the X8 frame to a VTOL prototype. I thought we’d share our journey and learning to hopefully help someone who wants to do something...
View ArticleClik here to view.
Error connecting cube over TCP to mission planner
@Nihal_y wrote: I am trying to connect cube over TCP to mission planner for swarming quads. But I get an error message telling connection failed. I have downloaded and installed MAVlink Proxy, Cygwin...
View Article