Clik here to view.
Rssi tx logs and bin.logs
@yak-54 wrote: any one come across this in there logs the tx rssi logs are good and the bin logs are not Snapshot_1.jpeg1608x868 179 KB Snapshot_2.jpeg1608x868 153 KB Posts: 1 Participants: 1 Read...
View ArticleClik here to view.
Calibration Compass - Mission Planner crashes
@Joerg1967 wrote: When calibration the Software Mission PLanner crashes with a error message. Version: 1.3.56 image.png1024x600 48.8 KB Posts: 1 Participants: 1 Read full topic
View ArticleWill not arm with rudder
@yak-54 wrote: took new plane out for its maiden today ( pixhawk 2.1 on Plane 3.8.5beta3 ) for life me will not arm with the rudder. but will arm with mission planer 2018-04-23 17-27-56.log.param...
View ArticleClik here to view.
Need Help with Diagnosis Log- Quad Plane Mishap
@Marthinus wrote: Firmware: Arduplane 3.8.4 Airframe: XUAV Talon 1718mm with 150mm wing extension each side Power: Tattu, 10000mah, 6Cell, 22.2V, 25C Pusher Motor: Maytech 3548-790-S, 790Rpm/V,...
View ArticleIs there a way to turn off throttle slew limiting for takeoff?
@RogerR wrote: Did my first catapult takeoff with my XUAV Clouds today. Went really well. But it’s a big and heavy airframe and my catapult can only accelerate it to “just about” stall speed. I set...
View ArticleParrot Disco motion equations
@Eyota wrote: In the context of the development of a collision detection and resolution system we use a Parrot Disco for our experiments, but we are facing some difficulties to find the motion...
View ArticleClik here to view.
Plane 3.8.5 released
@tridge wrote: APMPlane.jpg750x291 24 KB The ArduPilot development team is delighted to announce the release of 3.8.5. This fixes includes only a very small number of changes to maximise stability. We...
View ArticleDoes Quadplane take advantage of rangefinder in VTOL landing?
@pompecukor wrote: Could someone confirm or deny if a Lidar is or can be used to assist Vtol landing, that is like, make it slow down as it gets to 1m over ground and such? Sort of like 2 stage...
View ArticleRF8 and flight axis, missing throttle
@TopGun17 wrote: Hello! I have an question. I hope i can ask here. I can fly with my RF8 and everything is okey. But if i choose in Mission Planner SITL then my throttle is going automaticly zero....
View ArticleClik here to view.
Issue: Add support for new Teraranger EVO 60M
@Duds wrote: Hi guys, I have a Teraranger I want to get working on a new X8 build. I mainly want range sensing for reverse thrust landing. I have raised an issue in Gi, for anyone that wants to work...
View ArticleClik here to view.
Strange behaviour in stabilized on a S800
@Jan_Ivar_Haugen wrote: Hi guys. I`ve setup my mini apm in my Reptile S800 wing. Gone through the elevon setup. Servo1_function : 77 Servo2_function: 78 In flightmode Normal and stabilize the elevons...
View ArticleParrot Disco FCU replacement
@Anelito wrote: Hello, I would like to upgrade my parrot disco implementing computer vision based obstacle avoidance using OpenCV on a Raspberry Pi. Apparently the original flight controller CHUCK...
View ArticleOffboard navigation module
@chrs wrote: Hello, I posted this in the arducopter part of the forum, but no luck so far, so trying here as well! I’m working on a project where we will utilize a complete standalone navigation...
View ArticleAuto take off doesn’t activate the motor
@mic1hov wrote: After upgrading from 3.7.1 to 3.8.5 or 3.8.4 (tried both) the auto takeoff doesn’t seem to turn on the motor. My setup is a large heavy composite UAV so I am not willing to launch it...
View ArticleMultiple Closed Loop Mission Flight Plans
@garlandk wrote: In a future update is there anyway we could be able to do multiple closed loop flight plans? For example I should be able to send one closed loop flight plan and be able to send a...
View ArticleAbandoning X-Plane and going for RF8 for VTOL simulation?
@Andrew_Rabbitt wrote: I have been doing a lot of work recently on a VTOL Bi-copter configuration using X-plane 11 and SITL however there are some serious limitations in X-plane that limit the ability...
View ArticleSurprising No GCS heartbeat and failsafe preventing landing
@r4space1 wrote: Hi, I had a weird experience with plane yesterday. Took off for what was supposed to be a short up and round and land mission but immediately ran into a weird series of errors I...
View ArticleClik here to view.
Quadplane setup on px4 with hexacopter layout and two pushers
@Launchpad-McQ wrote: Hi! I am new to ardupilot and the setup guide to quadpllane is quite confusing. It says that for octa-quad the setup is the following: "Another common setup is an octa-quad,...
View ArticleClik here to view.
Roll oscillations due to servo voltage?
@lucamax wrote: I notice that recently sometimes a strange behavior appears on my plane, after few minutes a increasing oscillation of roll attitude appears. gkrellShoot_04-05-2018_110200.jpg766x442...
View ArticleExternal LED/USB
@Anton_Khrapov wrote: Hi, I’ve got a strange problem which I’m not sure how to solve. I’ve got a Pixhawk clone with an external LED/USB board. Two things: If I connect just this board (without power...
View Article