Unable to log data from pixy camera
@GeorgiGC wrote: Hi, I have received some code and am trying to view variables set up in the log file that record what the pixy camera sees. x position, y position, camera lock etc. However nothing...
View ArticleProblems with tailsitter-plane configuration
@illu92 wrote: Hi! i am trying a tailsitter drone with 2 motors (without tilt rotation)[servo function 73 and 74] and 2 ailerons, that works as elevons [servo function 77 and 78]Issue details My...
View ArticleUnwanted throttle in AUTO MISSION
@Caca_Nakagi wrote: Hi guys... During takeoff the plane went 100% in throttle and didn't stop even reaching the max speed set for the flight. It has a pitot earlier but we took it off.Someone could...
View ArticleQuestion about Aileron Differential
@flyingw wrote: I'm using ArduPlane 3.8.3 and a Navio2 flight controller. I set up my Taranis (OpenTX 2.2.1) to send aileron commands to the right and left ailerons on channels 1 and 7 respectively. I...
View ArticleHard crash due to servo failure?
@lucamax wrote: After dozens of successful flights I mounted a Lidar and upgrade to 3.8.4 . I was in FBWA and after a turn the plane suddenly fall on his right side and point his nose to ground .After...
View ArticleTiltrotor Motors not Responding in Q_STABILIZE Mode
@StudentX1 wrote: Hi all, I'm building a tilt tricopter using QuadPlane setup. I'm not sure why the motors don't work when in Q_Stabilize mode (when the motors are facing up). There's no response when...
View ArticleAutomatic landing lineup
@panascape wrote: Hi All, pretty new here but I am working on a build for a high tech UAV that's going to be used for anti poaching. The catch is that it may have to fly extended missions and while it...
View ArticleClik here to view.
Plane 3.8.5beta1 released
@tridge wrote: APMPlane.jpg750x291 23.4 KB This is a minor release with three new features, all related to airspeed. The first is to support the MS5525 sensor on multiple I2C addresses. Two new values...
View ArticleTailsitter without transition
@Mathis wrote: Hi,at the moment I'm building a tailsitter. In my case it would be very useful if i could fly in all degrees (form horizontal flight to Vertical) without a jump. But as it seems to me...
View ArticleUnwanted high speed- crash ARSPD_USE 0
@Saint wrote: Hi... after a crash i changed the ARSPD_USE to 0.And the behavior of the plane was very fast... Do i need to cancel other parameter with this...
View ArticleThree Dimensional Wind parameters? (SITL)
@Nick_Engle wrote: Is there a way to simulate updraft, or a way of adding a vertical component to the wind in SITL? After searching the parameters, I found the following relating to...
View ArticleBAD AHRS with Arduplane 3.8.4
@Brian_Duvall wrote: Is any one else running into a BAD AHRS problem when they flash to arduplane 3.8.4? I have performed all the compass, accel, and radio calibration and I cant get BAD AHRS to go...
View ArticleTailsitter 3D hoover single engine plane code
@TopGun17 wrote: Hello! I'm making a scool project and i have to build Tailsitter 3D hoover single engine plane. Exactly like in video what i share. THe plane what i have to build is in video at...
View ArticleClik here to view.
SITL flight simulator alternatives
@smathisen wrote: Hi, I use the ardupilot SITL as described here: http://ardupilot.org/dev/docs/sitl-simulator-software-in-the-loop.html, with JSBsim for flight simulation. However, I need to...
View ArticleHow is a vehicle supposed to land with a geo fencing floor
@Anthony wrote: With geo fencing enabled and a min alt floor (say 20m), how is one able to land? I’m thinking an auto mission, the pilot takes over for whatever reason and wants to land. If there’s a...
View ArticleX-Plane 11 - Whats the trick to connecting?
@Gary_Mortimer wrote: I have been trying all morning to get X-Plane 11 talk to Mission Planner. Every time X-Plane 11 crashes when trying to load a flight. Will keep trying, iI win I will post an...
View ArticleClik here to view.
Auto TakeOff - Different behaviour within the same flight
@AvengerNL wrote: I'm currently playing around with auto takeoff a little bit and so far mostly it's working quite good. However, sometimes I see some behaviour that is unexpected, or at least it is...
View ArticleAuto take off tuning
@yak-54 wrote: Hi all trying setup auto takeoff in manual mode it does not pull left or right on takeoffbut in auto as soon as it stop holding tail down ( TKOFF_TDRAG_SPD1 8 mps ) on the ground it...
View ArticleNo calibration on APM 2.6 running Plane 3.4
@thos wrote: Just starting out with ardupilot and I've reached what is a dead end for me. I'm posting hoping to get some direction in getting this fixed. I have two ardupilots, both version 2.6, and...
View ArticleClik here to view.
Automatic landing but no flare
@lucamax wrote: I recently added a Lidar and reversed thrust to my plane but the flare stage is not performed.The plane in fact once reached the flare point continues to sink to the ground and land...
View Article