Elevator channel not working on BG PixHawk 2.4.8
@Ramnes wrote: I have a Banggood Pixhawk 2.4.8( I know guys, it´s not a PH) and when setting it up on my Skywalker, the elevator channel is not working. I think i´ve read for many years ago that i can...
View ArticleWingwing z84 Tail Siter
@J.Leite wrote: I am planing to make a project with WingWing Z-84 to convert it in Tail sitter. I have never used ArduPlane before, I have experience with Mission planner for auto boats but will be my...
View ArticleEKF Problems , always make plane unstable
@semo wrote: Hi I used to fly my plane very good in manual but when I change to any mode with controls such as ( FBWA - Auto ) some times it show me warning in the HUD such as Error compass variance...
View ArticleIdle throttle setting problem when disarmed
@issam_Boukerch wrote: I installed APM pro on a calmato alpha 40 with gas engine DLE 10, I calibrated the radio. So when the plane is armed the throttle works well, but when the plane is disarmed, the...
View ArticleCircling a moving base station
@Screener wrote: Hi everyone I’m new to ArduPilot so this might seem like a novice question, spoiler alert; it is. I was hoping if anyone could tell me wether I could launch a long duration plane...
View ArticleQuadPlane issues
@Slager wrote: I just completed my first transition to forward flight, but I have a couple things going on with the MT that i just can't get sorted out on my own. First is the quad ESCs. I have a set...
View ArticleHow to set up elevons?
@Hugh_Neve wrote: Hi, I have searched for an answer - here, and via Google, but haven't found an answer that gets things working. All I want is to set up the aircraft with elevons: Hardware: v2.8;...
View ArticleIssue retrieving data flash logs from pixhawk (arduplane)
@GeorgiGC wrote: Hi, I have been trying to get data flash logs off my pixhawk and am encountering issues. If I flash the default arduplane onto the pixhawk from mission planner-initial setup-install...
View ArticleUse of Mavlink and Flight Deck at the same time
@master-of-desaster-8 wrote: Hello everybody, I use Mavlink and Flight Deck at the same time.Mavlink is connected to Telementrieport 1, Flight Deck with Taranis S.Bus at Telemetrieport 2.So far...
View ArticleAirspeed reporting in MAVLINK
@hurzburg wrote: Is airspeed reported via MAVLINK when no airspeed sensor is enabled? I know that it is continually computed by Arduplane even if no airspeed sensor is present as is wind speed and...
View ArticleBuilding numbus 1800, I have some problem
@UTRgames wrote: Hi, I'm building a Nimbus 1800 VTOL With Pixhawk2 and I have some questions.We are making a nimbus So can we know about that setted value for parameters Q_FRAME_CLASS, Q_TILT_MASK,...
View ArticleClik here to view.
FX-79 Buffalo QuadPlane Conversion
@GregCovey wrote: Hi, It's winter and I'm cold and bored. So it's time for another fun building project. My decision to leave my Ranger EX as a normal APM Plane left me with the 31" (800mm) quad...
View ArticleQuadplane pitch direction
@Barry_Bolton wrote: Just a quick question. Took my quadplane for a quick maiden flight and noticed that in Qhover the mode 2 pitch is backwards so pressing up on the radio moves the plane backwards...
View ArticleClik here to view.
Plane 3.8.4 released
@tridge wrote: APMPlane.jpg750x291 23.4 KB The ArduPilot dev team is proud to release version 3.8.4 of APM:Plane. This is a minor bugfix release, with just two small bugs fixed that have been...
View ArticleClik here to view.
Navigation turning performance issues
@Avxplr wrote: I can't seem to overcome some issues with the accuracy in AUTO mode navigation turning. I can turn my aircraft pretty tightly in FBWA, but I am not seeing the Pixhawk control the turns...
View ArticleAuto LAND Help for ArduPlane from the Beginning
@rijun034 wrote: Can anyone help me for the ArduPlane Landing with codes. I need to do Auto LAND using Pixhawk. Please guide from the beginning. Posts: 2 Participants: 2 Read full topic
View ArticleMultiple DO_LAND_START
@weliwarmer wrote: Hi, I'd like to have multiple alternate landing areas so that when RTL is triggered, the plane auto-lands at the nearest safe landing area. Rally Points only seem to allow LOITER at...
View ArticleAutoTakeOff: engine starts but only with about 30% power
@Air-Paco wrote: Hello, I have a problem with automatic takeoff with the PX4, version 3.7.1. If I run with the given 2 m / s, the engine starts but only with about 30% power. This is of course not...
View ArticleProper plane trimming procedure?
@g00bd0g wrote: Can someone please explain the correct procedure to establish trims for a new aircraft from scratch? Do I enable servo_auto_trim? I'm going to assume I 1st fly my maiden flight in...
View ArticleDO_CHANGE_SPEED not working?
@arthursn138 wrote: Hi folks, This might be the silliest topic so far, but it's driving me nuts.My plane refuses to obey any speed commands in auto mode. It does not change it's speed on...
View Article
