User software additions/modifications
@gpetty wrote: I'm new to ArduPlane, and for some applications I have in mind for the Pixhawk 2.1 (e.g., communication with external sensors), I'm told I need to consider adding user software. I am...
View ArticleData flash log is missing for certain duration
@dweepmalakar92 wrote: hello,Can somebody help me to find out the cause for ardupilot not storing the data in flash log for certain period. I am trying to solve stability issues for this flight....
View ArticleAUTO mode without waypoint
@dweepmalakar92 wrote: Hello everyone, I have got a log going to AUTO mode but we did not had any waypoint file. No mission was planned or stored in ardupilot. What does it suppose to do? Posts: 7...
View ArticleClik here to view.
Telemetry not logging
@arthursn138 wrote: Hey guys. I'm using RFD900x. I have LOG_BITMASK set to log everything.However, I can not find any parameters for telemetry signal (rssi, remrssi, noise, remnoise,...). As far as I...
View ArticleClik here to view.
Problems with airspeed and Elevon
@juvinski wrote: Hi, I'm doing several tests with I2C Airspeed and I'm with a behavior I can't explain.After the boot and warm up before enable airspeed the elevons was always flat. Now after I...
View ArticleClik here to view.
Feature in Mission Planner
@Shafwan_Nordin wrote: Hi, I just wondering what are the functions of these two, the one with RED SQUARE BOX on top of the mission planner. please enlighten me about these two features....
View ArticleTelemetry lost while in FBWA or Manual with joystick over MAVlink
@Sagaris wrote: Hi All! I'm wondering what will happen if UAV will fly in manual or assisted (FBWA, etc) mode with joystick control being out of RC transmitter signal range and then telemetry will...
View ArticleQuadplane with front tlit rotor
@garlinplus wrote: Hi!I designed a quadplane with two front tilt rotor.when I test it on ground It looks very great.But when I begin to tilt the front rotor for fw mode, if the tilt angle greater than...
View ArticleClik here to view.
Big alt lose when switch into RTL
@innovation wrote: Hello,everyone! My plane 's firmware is Arduplane 3.7.1.When I fly it with FBWA where "the alt=100m，airspeed=20m/s"，my plane's cruise speed is set 15m/s ，"ALT_HOLD_RTL" is set...
View ArticleHardware-in-the-loop simulation - HIL - simulation
@MMMM wrote: How can make Hardware-in-the-loop simulation - HIL - simulation by Arduino useing APM How can I create this?? Posts: 1 Participants: 1 Read full topic
View ArticleInstallation issue at make sitl -j4
@Jay_Jagtap wrote: I have the following output when I execute make sitl -j4I have followed the installation steps as in http://ardupilot.org/dev/docs/sitl-native-on-windows.html hp@LAPTOP-59TH2EJC...
View ArticleMini Talon Quadplane yaw oscillations
@Eosbandi wrote: Hi Guys, I tried to maiden my mini talon quadplane, but run into a strange issue.After takeoff in QLOITER , it seems quite ok, but after some yaw input, it goes into some kind of YAW...
View ArticleChange the SD card data logging rate on Pixhawk
@StuZza wrote: Hi there,I need to analyse some flight data for a uni project but I need the data to be recorded at around 100 Hz. I have seen (in the sdlog2 parameter file) that the fastest rate is...
View ArticleQuadplane sudden Flip while in QHOVER
@MRC87 wrote: I was out testing some new Lithium Ion batteries today in my quadplane, it is running an original pixhawk, arduplane 3.8.0 with emlid reach RTK GPS (which to note I did not have the Base...
View ArticleAscending or descending spiral about a fixed point
@gpetty wrote: Is there a way to program a fixed wing UAV using ArduPlane to fly an ascending spiral about a fixed location up to some maximum altitude and then descend in a similar spiral? I realize...
View ArticleClik here to view.
Bug with Frsky native telemetry - Arming disable it
@lucamax wrote: I use the native standard Frsky telemetry as described in Wiki documentation. gkrellShoot_10-04-17_184739.jpg720x335 32.2 KB Taranis X9D, X8R receiver, Pixhawk, Rs232 to TTL converter...
View ArticleUpdate to 3.8.2 reversed aileron servo actions
@gpetty wrote: I just updated from what I believe was a beta version of 3.8 to 3.8.2. When arming the plane in manual mode and testing control responses from my RC transmitter, I found that the...
View ArticleAre TELEM1 and TELEM2 the same on Pixracer?
@flyingw wrote: Is there a difference between TELEM1 and TELEM2 on a Pixracer? Are they both always on? Thanks, Paul Posts: 3 Participants: 2 Read full topic
View ArticleFBWA etc control compensation direction
@mpjf01 wrote: Just upgraded from 3.7.1 to 3.8.2. The elevator compensation in FBWA and Stabilise etc is the opposite of what it should be and I need to reverse it. I have searched the Wiki, that...
View Article3.8.2 Upgrade upsets ESC
@mpjf01 wrote: Upgrade from 3.7.1 to 3.8.2. ESC beeps continuously when safety switch is pressed. ESC documentation (Turnigy Plush) suggests that this is because the battery voltage is either too high...
View Article