Clik here to view.
Baro Alt /w Airspeed Sensor // differs from Take-Off to Landing by 15m
@Alex77 wrote: Dear community, i use a standard digital airspeed sensor (with the 4525DO sensor) and a HolyBro Pix32.MP is 1.3.48 with Arduplane 3.7.1. 1)First thing i noticed is the airspeed always...
View ArticleClik here to view.
QuadPlane Multiple VTOL Lands & VTOL Take-offs in a single Mission
@Alexander_Perez wrote: Hello, Has anyone tried to perform multiple VTOL take-offs and VTOL Lands in a single mission? So far, I am able perform a VTOL take-off, fly through waypoints and perform a...
View ArticleProblems with Airspeed reading
@jhgoyer wrote: When downloading and compiling ArduPlane using the instructions here: http://ardupilot.org/dev/docs/building-px4-for-linux-with-make.html#building-px4-for-linux-with-make Everything...
View ArticleAirspeed Sensor Reading Malfunction
@jhgoyer wrote: When downloading and compiling ArduPlane using the instructions here: http://ardupilot.org/dev/docs/building-px4-for-linux-with-make.html#building-px4-for-linux-with-make Everything...
View ArticleExpected 3.8 differences from 3.7
@hunt0r wrote: Sorry, I'm not sure where to ask this... please delete or move if desired: I'm considering whether to use the latest stable Plane or a beta version for an August research flight...
View ArticleClik here to view.
Strange vibration event - while airplane is gliding and motor is off
@bchristal wrote: I've seen this a few times. Thought I'd put up a log and see if anybody has any ideas. This is usually a catastrophic failure. I lucked out and the airplane recovered. Details*...
View ArticleQuadPlane Parameters
@evanp18 wrote: Hello all, Several weeks ago, while flying my Skywalker X8, which had VTOL implemented, I had a very bad wreck. This happened while attempting to land in QLoiter mode. As I was...
View ArticleUnits of measure in standard params
@nomisreltub wrote: Hi, I cannot work out if the units of measure in params config is Metres or millimetres? Any clue.apm 2.0.24 Posts: 2 Participants: 2 Read full topic
View ArticleLeft Aileron do not respond in FBWA mode
@lucamax wrote: I really do not understand what is happening to my delta wing . This morning after take off the plane was turning left by itself in FBWA and was very difficult to control. After reboot...
View ArticleSkywalker X8 QuadPlane Parameters
@evanp18 wrote: Hello all, This is a repost from a different topic. Several weeks ago, while flying my Skywalker X8 Quadplane, I had a very bad wreck. This happened while attempting to land in QLoiter...
View ArticleSecond battery failsafe
@Georacer wrote: Hello everyone, I was wondering whether it is possible to trigger a failsafe from the 2nd battery voltage measurement.Is this possible? If yes, how can this be done? Thanks! Posts: 1...
View ArticleFlight mode jumps when going to another flight
@yak-54 wrote: Hi got an issue when select flight mode with 6 positions switch on a frsky horusif i go to auto p it goes to rtl first then to auto p and if i go to stabilise it goes to cruse first...
View ArticleNegative value for flight mode?
@Inae wrote: I have a strange question: I fly gliders equipped with APM 2.5 for several years and I'm very happy about it. Recently I made a mistake with Mission Planner by defining "Flight mode...
View ArticleGood sites to learn ardupilot coding
@aditya wrote: I am new to the ardupilot. Can anyone pls tell me some gud sites to learn coding for ardupilot Posts: 1 Participants: 1 Read full topic
View ArticleNo Heartbeat only for ArduPlane V3.7.1 Firmware
@ypsonar wrote: I am regularly use Mission Planner, but today I am facing problem to install firmware for Arduplane V3.7.1.Arduplane V3.7.1. Installed properly, but not connecting, shows error as "No...
View ArticleHow to run a quadplane in SITL with ICE engine enabled
@worm_earth wrote: Hi, guys. I'm trying to run quadplane with ICE engine in SITL, howevery the ICE engine seems not work right. I started sitl by this commandsim_vehicle.py -f quadplane --consolethen...
View ArticleAutonomous parafoil flyback for high powered rocket recovery
@Randy_Steck wrote: After a bit of research, it appears that you folks are probably the most conversant to give advice for a project that's a bit out of the ordinary. I fly high powered rockets and we...
View ArticleSBUS Failsafe Flag(s)
@flyingw wrote: Does ArduPlane read the SBUS failsafe flag(s) in its failsafe logic? Where in the parameters list would I set this capability? Thanks, Paul Posts: 1 Participants: 1 Read full topic
View ArticleClik here to view.
Flight altitude of 50 m
@dobrovdmitry wrote: We used the software version of the autopilot Ardu Plane V3.8.0 Beta 3.The work of the autopilot did not have problems with this software.But in one of the flights there was an...
View ArticleClik here to view.
Automatic landing always abort itself after updating to ArduPlane 3.8beta
@Adolfo_Cobo wrote: Hello to all, I had to switch to ArduPlane 3.8beta5 after several crashes that seemed related to a bug resetting integrators of PIDs on mode changes with ArduPlane 3.7.1, and...
View Article