Quadplane firmware
@IMRAN wrote: Hi all, I have a custom build of arduplane ready to go, but its just arduplane. I plane to send use it on my Quadplane, but was wondering if the copter functionality would work...
View ArticleClik here to view.
RTL -> THR to 100 -> Skywalker Crash
@victole wrote: Hi guys, I had a strange problem on the last flight that caused my skywalker to crash. At one point during the flight, I activated RTL and everything went well, when it got to home and...
View ArticleClik here to view.
APJ Tools error
@andyp wrote: Hi. Trying to run APJ Tools. I have miniconda installed, and the python ‘hello world’ works. When I try running APJ tools I get: (base) C:\Users\Andrew\Desktop\test>python apj_tool.py...
View ArticleChange serial port receiver mavlink
@MastroDado wrote: Hi, i’m Domenico, i’m new to ardupilot and all the derivative and i have a question; i would like to use the receiver (crossfire outputting only mavlink) on a matek f765 on the...
View ArticleClik here to view.
Simulation of Tiltrotor in gazebo
@Abheesh_Khanal wrote: I am trying to simulate custom made quad tiltrotor VTOL on gazebo before trying it on real world. I’ve made model of tiltrotor and load it with the parameters with Ardupilot on...
View ArticleShould I be using Cube Black app or 4.0.6
@Steven_Young wrote: HI all, I have a Nimbus VTOL from fox tech. When I received it I had to update Ardupilot and parameters. Foxtech advised to use Cube Black Apj and their PG20 cube black parameter...
View ArticleSkywalker X8 VTOL Oscillating at Landing
@ipank wrote: Hi everybody, Would anyone be able to help me out with this one? This is our maiden flight VTOL Skywalker X8, when I take off with QLOITER mode all motors spin fine and when I switch to...
View ArticleWhere is jsbsim in apm?
@lfeng17 wrote: Hi everyone. The default sitl tool is jsbsim in apm， but I cannot find where jsbsim is in the apm code and how it is used by API. Can anyone tell me? Thank you! Posts: 1 Participants:...
View ArticleClik here to view.
Altitude control with precise sensors
@MAP_LLC wrote: In an effort to improve on precision in automatic landings we are using a lidar rangefinder (Tf Mini Plus - max range 12m) and GNSS RTK. While horizontal control with RTK GNSS seems to...
View ArticleClik here to view.
Geo Fence does not work in Mission Planner and Arduplane?
@dale2020 wrote: fence does not work1282×1284 331 KB Hi, it seems geo fence is not supported in Mission Planner 1.3.74 and Arduplane 4.0.6, is that correct? I tried QGroundControl and got the same...
View ArticleClik here to view.
S-800 SkyShadow TVBS
@hwurzburg wrote: My love of TVBS drove me to another conversion project. A bit smaller than the Z-84, with smaller motors (1804), The S-800 Sky Shadow is comparable or even a bit cheaper than the...
View ArticleHELP learning long rage for plane
@jcdecampo wrote: Hello All I have a DJI Mavic Pro which I can flight 5 km far way. and see all with a save return home (all you already know mavic Does) Im willing to do the same with a plane or a...
View ArticleDownload firmware from Pixhack board
@Amir_Mazyaki wrote: I was uploaded a custom firmware to a CUAV Pixhack V3x board. and I lost my APJ file. how can i download it from board and programming another V3x board?? Posts: 1 Participants: 1...
View ArticlePackage place autonomous mode for quadplane
@Dronedown wrote: I’m building a Vtol quadplane and am using a winch to deliver packages, this autopilot function appears to only be available for the copter frame type. Any way to use it for a...
View ArticleHas anyone built a Mugin 2930 and had problems
@Dustin_Mccreery wrote: I have the full carbon 2930 with the recommended power pack running 12s for the quad and 6s for plane. we are going almost 80% throttle to hold above stall speed. I have done...
View ArticleIs there a post 3.4 source code for ArduPlane without Quadplane?
@Andrew_Rabbitt wrote: Has any version of ArduPlane been kept up to date without Quadplane embedded in it? Just asking before I attempt to update 3.4 as a base for some code hackery. Posts: 3...
View ArticleControl RunCam Split 4 video recording from a radio transmitter
@sandre wrote: Hi, I am trying to set up RunCam Split 4 video recording from a radio transmitter using this instruction. I have Matek f765-wing board with Arduplane 4.1 dev build. Camera connected to...
View ArticleParameter function changes Cube Black (Foxtech) to 4.0.6
@Steven_Young wrote: I have a Nimbus VTOL from foxtech. When I received it I had to update Ardupilot and parameters. Foxtech advised to use Cube Black Apj (version they sent me) and their PG20 cube...
View ArticleMission planner can't download log file
@panharith1998 wrote: hello guy, right now i want to download log file from my fly-controller pixhawk4 but got some error message that i can’t download my log file. could anyone help me to download my...
View ArticleClik here to view.
Throttle chatter/spiking when in auto throttle modes
@Perleytf wrote: Hey folks, I’ve been working through the set up of a Bixler 3. I’ve performed AUTOTUNE several times now, the plane flies great in FBWA. When I switch to auto throttle modes like FBWB...
View Article