Which small FC for a sailplane?
@ultrafuge wrote: Hi, I want to put a FC in a sailplane and basically I just need Stabilize and RTL flight modes. Any suggestions for a reliable and small FC (I am used to Pixhawk 2.1 which is way too...
View ArticlePixhawk 2.4.8 Cant connect to pc after FM 4.0
@Mdmaestro wrote: Hi. I have a pixhawk 2.4.8( Px1) and it was working very well on my Talon and it was connecting bot of my laptops easily. (one of win7 , other one win 10 ).When i load the arduplane...
View Article"Throttle Failsafe Off" msg randomly appear
@David998 wrote: I am running omnibus f4pro on V4.0.3. I have this message popped up during cruise in auto mode twice already, on two different plane and two different radio system. I am not running...
View ArticlePlane finally stalled, while in auto mode
@David998 wrote: Even without an external airspeed indicator installed (so cannot use ARSPD_USE), I believe ardupilot is still using some form of airspeed for control. I used to have very high...
View ArticleARM Cross-Compiler Update
@mgrindle wrote: On Ubuntu flavors, there is an update to the ARM Cross-Compiler and components from the version (v7.4.0) that the ArduPilot ‘Build Code’ script installs. The system update wants to...
View ArticleClik here to view.
QuadPlane VTOL - All VTOL motors stopped in flight - Crash
@rmtorre wrote: Hello, I have a fixed-wing with ICE engine and 4 electric motors for VTOL operation. I was flying today and during the VTOL landing, suddenly all VTOL motors stopped (First PWM=1200 -...
View ArticleClik here to view.
Vibration Analysis FFT
@Sean_Loh wrote: Anyone knows how to analyse vibration data after performing FFT using mission planner? image1875×902 211 KB Posts: 2 Participants: 2 Read full topic
View ArticleHelp regarding selection of resin for fiberglass reinforcement on skywalkker...
@Shubham_Thakur wrote: Hello, I am building a skywaker X8 and want to reinforce belly, nose and leading edge of the plane. After looking up for different ways I decided to stick with...
View ArticleNeed to set a parameter value using a TX switch
@Bruce1 wrote: I’m sure this is possible but I can’t figure it out myself, so experts please help. I just want to use a switch on my TX (X9D) to set the RUDD_DT_GAIN (Differential Throttle) parameter...
View ArticleClik here to view.
Quadplane without airspeed sensor
@hybrid-guy wrote: Has anyone been running a VTOL/Quadplane without an airspeed sensor? I saw on the PX4 forum that vertical technologies is NOT using one and claims increase in efficiency… This is...
View ArticleClik here to view.
LIDAR Lite V3, PWM not working with Pixhawk2.1 Cube Black, ChibiOS ,...
@aissi wrote: I am not able to get lidar lite V3 working with PWM I am using Pixhawk2.1 Black Cube, ChibiOS, Arduplane FMW V4.0.5 stable. I did the same as described in the link. 21236×520 32.7 KB...
View ArticleClik here to view.
Quadplane 4+1VTOL, transition phase throttle too high?
@makeflyeasy wrote: Everybody is good!I tested a 4+1 VTOL, but in the manual mode, the conversion throttle is normal, but in the automatic route mode, the multi-rotor to fixed-wing phase, the...
View ArticleClik here to view.
Ail and aux1, 2 mixing problem
@Ricoman wrote: Screenshot_20200313-142831_Samsung Notes1080×2280 197 KB Mixing of ele and ail works. I want to mix ele and aux1, 2. This is not as good as when mixing ail. Mixing ele and ail does not...
View ArticleCube orange running arduplane 4.0.5 twiching servo problem
@Brian_Duvall wrote: I just recently upgraded my plane from an original 3dr pixhawk to a cube orange. We I go into stab or FBW A or B the Aileron servos and elevator servos with twitch randomly when...
View ArticleUnable to trigger Sony alpha 6000 with pixhawk using foxtech camera trigger...
@Shubham_Thakur wrote: Hello! I have a sony alpha 6000 with 16-50 mm lens and foxtech camera trigger cable to trigger the camera using pixhawk. I want to install this camera on skywaker X8. I am stuck...
View ArticleStrange Pixhawk startup sound since plane lost
@Anselme wrote: Hello ! On my last flight I stucked my Skyhunter on the top of a 90ft tree… On a stupid badly configured failsafe. Managed to get it down 2 days later with a professional tree climber....
View ArticleI lost RC input from 3.9.x to 4.0.x
@bendead wrote: Hi guys Something very weird happened. I have a vtol that was running arduplane 3.9.8 with a VDC15 here So it’s simply a Taranis, connected to a X8R, connected to VDC Transmitter than...
View ArticleAirship,blimp,balloon support
@imnobodyet wrote: Hello, I’m working on a project uses Helium balloons (radius >= 1m), we put 6 motors(bi-directional ? sorry don’t know what it’s called) attached on the surface of the balloon: 2...
View ArticleNew RCn_OPTION to disable RUDD_DT_GAIN please
@Bruce1 wrote: I am using RUDD_DT_GAIN to help my large twin engine Grumman Albatross flying boat steer on the water. I therefore also use 73/74 SERVOn_FUNCTION outputs for the left and right motors....
View ArticleAltitude drift to 5 meters after startup
@David998 wrote: Recently tried using autoland and it worked nicely on one plane, until I switched to other planes. Slightly different airframe but all hardware are essentially the same. All 3 planes...
View Article