Quantcast
Channel: ArduPlane - ArduPilot Discourse
Browsing all 7817 articles
Browse latest View live

Image may be NSFW.
Clik here to view.

Setting up a new Fixed Wing Vector Tricopter

@pscott wrote: Hey all, It’s about time I started a thread about my project. I imagine some of you will have seen this work on the ardupilot facebook group, my project page, or eve my Linkedin...

View Article


Image may be NSFW.
Clik here to view.

Stall during Takeoff

@Bagrat wrote: Hey All During takeoff, the autopilot reduces the throttle unexpectedly before reaching the takeoff altitude and the aircraft stalls, any thoughts why it would reduce the throttle max?...

View Article


Does installing new firmware over write existing parameters?

@jimmy wrote: after installing new plane firmware does it overwrite existing parameters, using mission planner? Posts: 3 Participants: 2 Read full topic

View Article

Image may be NSFW.
Clik here to view.

OmniBus Pro v2, Arduplane 4.0.3, help

@Rui_Simoes wrote: Hello all, First post. hope i am doing it in the right place. I am running Arduplane 4.0.3 in omnibus pro v2, flying wing s800. The wing i used to fly without any FC. And it flew...

View Article

Has anyone used flow meters/ sensors to measure fuel burn rate?

@Ivan_Tan wrote: Hi there! I would like to equip my team’s quadplane with a fuel monitoring system. One of the sensors I have been considering is a liquid flow meter. By using the flow meter to...

View Article


QuadPlane transition in case of in-flight failure

@maciek252 wrote: I’m starting with ordering parts for my first QuadPlane build. I’ve always been interested in improving the robustness of my airplanes in case of equipment failures. So I have a...

View Article

Image may be NSFW.
Clik here to view.

Hardware in the loop simulation, button disappeared from Missionplanner

@joihn wrote: Hello, I’m trying to achieve hardware in the loop (HITL) simulation using “X-plane 11”. Here is the doc : https://ardupilot.org/dev/docs/x-plane-hardware-in-the-loop-simulation.html...

View Article

Image may be NSFW.
Clik here to view.

Control diagram for tailsitter VTOL

@joihn wrote: I’m looking for the control model of the tailsitter VTOL mode (from arduPlane branch) So far I have found: Control diagram of arducopter...

View Article


Spinning Servo?

@kerrycorcoran wrote: Matek F405STD w/ FCHub. Flashed w/ Arduplane 4.04. Trying to test the servos and when I connect power the servo just spins all the way around. If I put the servo on a tester it...

View Article


Is it possible to replicate a bungee launch in SITL?

@aharon.moto wrote: We are having a stall after a bungee launch when the plane reaches to the given altitude. The problem is that the plane speed goes down the minimum required speed. I wonder if it...

View Article

Potential bug with ADSB avoid features in AP3.9.8

@kiru wrote: Hi everyone! I am part of the Yonah team and we are currently trying to implement the ADSB avoidance feature onto our quadplane. I was on SITL to test how well this feature works and what...

View Article

PLND for QuadPlane

@Edward63 wrote: Is it possible to add PLND for VTOL? There is a need to use IR-LOSK for an exact landing. Posts: 1 Participants: 1 Read full topic

View Article

Run 6s battery on 4s motor buid

@xingxing wrote: hi guys it is running 4s battery with 4s motor and 6s ESC on my RAMBLER RS,but now I’m going to use 6s battery on my 4s buid ,but I don’t know how to limit the power in arduplane...

View Article


Image may be NSFW.
Clik here to view.

Gremsy Pixy F with Plane 4.0.5

@mwrightE38 wrote: I’m running into some issues integrating a Gremsy Pixy F with plane 4.0.5. I can get it working just fine on copter 4.0.3 both running chibi os on a blue cube standard carrier...

View Article

Image may be NSFW.
Clik here to view.

Takeoff restarts when Plane is landed

@Doppler_uav wrote: Hi, We have a fixed wing configured for autoladind, with airspeed sensor and no Lidar. Some flights were OK but the last one, once the plane has landed, the motors were full power...

View Article


Mission Planner and OpenCV

@quaxton wrote: I want to use OpenCV with Mission Planner, where I have the drone visit waypoints and when it reaches the last waypoint it uses OpenCV to detect and track an object and follow it. Do I...

View Article

How to give a target Heading over MAVLink

@Knewhervel wrote: Hey, is it possible to give a target heading over MAVLink? From my understanding its only possible to give an Attitude Control Target, which is quite different. So is it just not...

View Article


Help regarding camera for mapping platform on Skywalker X8

@Shubham_Thakur wrote: Hello, I am building a skywalker X8 for mapping purpose. I have decided to use Sony a6000 for the purpose. I want help regarding selection of the lens for sony a6000. Which lens...

View Article

Data transfer from Arduino UNO to Pixhawk: Potentiometer

@Gabsxk wrote: Hello, I would like to know if anyone has already managed to send data from arduino to pixhawk and save them. I would like to know how the connections were made and the code used. My...

View Article

Hover attitude control in FBW-A

@Andrew_Rabbitt wrote: If I am in FBW-A mode and the throttle at zero, I will be hovering still - can anyone point me to where the gains are gotten from to control this mode of flight? In my current...

View Article
Browsing all 7817 articles
Browse latest View live