Tailsitter biplane+4 motor
@jesus_taax wrote: Hello, I´m trying to find the configuration for a tailsitter with 4 motor and bi-plane configuration. Something like this:...
View ArticleRequest for ideas for fuel management in quadplane
@Ivan_Tan wrote: Hi there! I am Ivan from team Yonah. Our team’s end goal is to build an autonomous system (currently a quadplane) that we can use to help rural healthcare providers with...
View ArticleDshoot600 BLHELI_S 16.6 on AUX PINS wants throttle calibration
@mauris wrote: I upgraded my ESC to this one https://banggood.com/EXUAV-Lighting-70A-2-6S-BLHeli_S-Brushless-ESC-Support-Dshot600-for-RC-FPV-Racing-Drone-p-1246574.html The ESC seems support Dshoot...
View ArticleDoes the Bicopter mode setting set the flight parameters according to the...
@sheyao wrote: Does the Bicopter mode setting set the flight parameters according to the TAILSIT setting or the OctaQuad mode? Do you have a good heart tell me? Q_TILT_TYPE = 3 Bicopter Posts: 2...
View ArticleVtol hexaplane wiith 2 front tilt rotor
@ton999 wrote: Hello guys, I want to build efficient and reliable Vtol Hexaplane with 2 front tilt rotors. The first question is how is the best layout motor configuration, because this is not a...
View ArticleCan't configure battery monitor
@wazoo22 wrote: New radiolink pixhawk 1 with the generic power cube that came with it. Latest MP, latest AP. When I try to configure the battery monitor in optional hardware as “analog voltage and...
View ArticleSlow refresh rate on LidarLite v3HP I2C
@nikago wrote: Hello, new guy here. I’m setting up a standard fixed wing airplane on Holybro Pixhawk 4 with a LidarLite v3HP via i2c. Everything works except I get a measurement once every 1-2...
View ArticlePlane 3.9.x seconde GPS connect
@Engg_Ya_r wrote: Hello iwant to connect two GPS for more qualty but what the better connection ?? thanks Posts: 1 Participants: 1 Read full topic
View ArticleCrash on 3.9.9. No airspeed reading
@Ed_209 wrote: I had a catastrophic crash with my Mini Talon today. She had flown beautifully many times before. Before this flight, I changed the autotune parameter from 6 to 7 as I wanted to get a...
View ArticleAuxiliary Functions in Plane?
@mike_d wrote: I’m really experienced with ArduCopter, but not so much with ArduPlane. I am looking for the RCx_OPTION params so that I can set things like CH8 high triggers RTL, or things like that....
View ArticleSetting servo limits, and airspeed
@wazoo22 wrote: When setting up Arduplane, where should I set up the desired surface travel? In arduplane, or in my transmitter? If, for example, I need 10mm elevon “up” travel, should I set this up...
View ArticleVoltage not reading
@woogie_man wrote: I am trying to get my Matek F405 CTR board set up with mission planner, and I am unable to get the program to see the voltage. Attempted to go through the wiki page, but still...
View ArticleQuestion about the 3.9.9 parameter
@sheyao wrote: There are VT_FW_PERM_STAB and VT_ELEV_MC_LOCK parameters in the QGroundControl native firmware. What are the corresponding parameters in the 3.9.9 firmware? In my memory, in vtol mode,...
View ArticleIssues (bouncing/balloning) with auto landing in VTOL mode - Nimbus tricopter...
@Arunabha42 wrote: Hey all, I’m having trouble getting the aircraft to settle down calmly when it touches down after completing an AUTO mission. It touches down, then attempts to takeoff again,...
View ArticleAircraft weight vs crosswind effect
@hans123 wrote: Hi! This topic has nothing to do with software problems. Didn’t know where else to post this. My question is- is there some equals to aircraft weight and crosswind? Does the 20kg...
View ArticleFull house glider mixing
@twormsley wrote: I have a full house glider; crow, ail > rudder, ail > flaps, 3 camber settings on flaps and ailerons, etc. Currently, all of this mixing is done with my TX. When I install the...
View ArticleFull house glider mixing or not
@twormsley wrote: I posted this on the support forum, but thought this may be a better place to post. I have a full house glider; crow, ail > rudder, ail > flaps, 3 camber settings on flaps and...
View ArticlePlane 3.9.11 release
@tridge wrote: ArduPilotPlane.jpg750×291 33.1 KB I’ve just released 3.9.11beta1. The 3.9.11 release includes two changes: fixed the COMPASS_DEV_ID for UAVCAN compasses, which was using an...
View ArticleCube with arduplane firmware 3.9.10 issues
@Engnr_Mirza_Khurram wrote: hi, I am using pix hawk 2 cube with firmware 3.9.10, last few weeks, I am working on my mini UAV delta wing, But having a strange problem with this. On ground,I checked...
View Articlecruise rtl pumps
@Schachti wrote: Hello, have a sonic model - binary. He flies very well in manuel mode, he also flies clean in the fbw. The plane stops at about 50% gas its height. Only in the cruise or RTL he pumps...
View Article