@Deafro wrote:
I’m running JSBsim though ardupilot as outlined in the instructions below.
http://ardupilot.org/dev/docs/setting-up-sitl-on-linux.htmlI’ve built a few aircraft through JSBsim’s Aeromatic program, and all the electrical engine variants work as intended. Whenever I load up a model with a piston engine, the model aircraft successfully arms, but the aircraft does not move. From the data logs, its clear the throttle is maxed, but there is no propulsion from the engine. I’ve tried it with one of JSBsim’s default aircraft like the L17 model, and ran into the same problem. Has anyone else experienced this problem? I’m only using the files generated by Aeromatic in Tools/autotest/aircraft and running the program through “sim_vehicle.py -f jsbsim”.
Posts: 1
Participants: 1