A parameter file for VTOL Tricopter
@ITZIK_RONEN wrote: Can anyone be kind and share with me the parameter file for VTOL Tricopter? The configuration is: Two front motors tilting together Rear motor vector yow I like to use it as a...
View ArticleClik here to view.
Quadplane failing to take transition
@Abheesh_Khanal wrote: Hello. I tried to fly Quadplane in AUTO mode. It was running fine before. But after several tries, suddenly it failed to transition from VTOL to plane mode. The pusher motor...
View ArticleRTL and AUTO mode are pitching down aggressively
@itsnotme wrote: Hi guys, I have a problem with a believer with matek f405 wing that has latest arduplane fw. I launched it in TakeOff mode successfully, after that I switched to FBWA and flew very...
View ArticleReptile Dragon first's VTOL mod
@Aerial_Drones wrote: Hi guys, i have completed full mod to vtol. All parts designed by me from scratch, inspired from the awesome ‘@mark_q’ minitalon project . Initial hover tests completed with...
View ArticleTilt motors don't tilt at all
@Carlo_b4 wrote: Hi, I’m an engeneering student and I’ve a big problem I can’t solve by months. I’m building a QuadPlane (4 motor, with the 2 ahead tiltable). I’ve set the Q_FRAME_CLASS as a quad,...
View ArticleDo I need gimbal for fixed wing mapping?
@RizHass wrote: I like to learn more about fixed wing mapping. Please see three questions below. do I need a 1 or 2 axis gimbal for mapping? what type of mapping requires a gimbal? How affective servo...
View ArticleAirspeed sensor calibration problem
@sandre wrote: Hi, I am using a Matek airspeed sensor ASPD-7002. When I recalibrate it in a few minutes after turning power on, I get pretty good readings in still air, close to zero (0-3km/h,...
View ArticleESC Calibration issues - Matek F405 Wing, CrossFire, Mantis ESC
@lt.smash wrote: I tried many many settings in the radio and mission planner to get my mantis 35a working on the Matek F405 with arduopilot, but im sure i missed the most important setting Before I...
View ArticleThrottle lost result in crash
@Kristiqn_Ushatov wrote: Hello. Yesterday i flew a plane equipped with matek wing f765 with gps module and without airspeed sensor. With betaflight I have installed arduplane stable version 4.0.6....
View ArticleClik here to view.
Problems with PPM Input on OMNIBUSF4
@RLux8 wrote: Hello guys, so my plan was to build a tricopter using this FC: amazon.de Sumicline HF4 Integrierter Betaflight OSD Flugregler für FPV Drone / Hobby:... Sumicline HF4 Integrierter...
View ArticleBad Day for my new model altitude and pitch problem
@Malpom wrote: Hi good evening at all, good day for fly but bad day for my new model SetuP Radio Crossfire Tx video 1.2 Matek FC F405 wing new Model Mini Talon 4 Analog servo Cam Runcam Split (died)...
View ArticleWhat happens when maximum airspeed is achieved?
@Sunny52266 wrote: Hello everyone! If a minimum groundspeed of say 8m/s is specified and the plane reaches its maximum fbw speed defined in software, say 28m/s due to winds, does this situation cause...
View ArticleJSBSim for XUAV Talon
@majorpr13 wrote: Has anyone created a JSBSim file that can accompany the simulation for arduplane rather than a Sig110? Thanks. Posts: 1 Participants: 1 Read full topic
View ArticleRLL2SRV_RMAX and roll rate limit in plane mode
@edomingo1 wrote: Is there any way to limit the roll rate (deg/s) rotation in auto mode for the plane auto flight modes? I’m trying to make my plane fly more gentle and smooth and not to have the...
View ArticleClik here to view.
FTP watchdog reset on H7 ChibiOS
@adezie wrote: so later this evening i’ve found out that sometimes(rarely) a watchdog in ChibiOS on H7 could occurred and state FTP as the problem, as I start to debug using gdb, I’ve found out that...
View ArticleHow to enable CH9 and Ch10 to control gimbal on Matek F765?
@RizHass wrote: I have a BCG gimbal controller and I want to control pitch and roll motion from RC radio. What parameters do I need to enable in Mission Planner? I have removed the power wire between...
View ArticleHeilquad for Q_frame_class?
@Brian_Duvall wrote: Hello all, I am working a tilt wing VTOL that has eight variable pitch propellers. 6 of the eight are on the leading edge of the wing that tilts. The other two are in a V-tail ....
View ArticleTakeoff flight mode vs. takeoff in a mission, Plane 4.0.6
@dale2020 wrote: I’m learning how to use rolling Auto Takeoff on my taildragger Volantex Ranger EX. I’ve used both takeoff flight mode and takeoff in a mission. might be a coincidence, but takeoff in...
View ArticleKakute F7 in flying wing?
@wsmeyer wrote: Getting ready for it’s maiden flight. I had a spare F7 not being used but figured I better double check there’s nothing wrong with using this FC instead of a “wing” variety. William....
View ArticleClik here to view.
[Q] How to set pitch-yaw-roll values to control ArduPlane?
@velid_0 wrote: Hello everbody I’m new in this community so I hope I’m not distubing this forum with my dumb questions, I was running ArduCopter sitl and dronekit for my project. I could able to send...
View Article