@Malpom wrote:
Hi good evening at all, good day for fly but bad day for my new model
SetuP
Radio Crossfire
Tx video 1.2 Matek
FC F405 wing new
Model Mini Talon
4 Analog servo
Cam Runcam Split (died)
Motor sunnysky
Battery 4S2P 21700 5000maheverything went well at take-off no problem the model looked well leveled and responded to the controls, I performed the first turn right in the middle of the straight I noticed that the model in FBWA began to hit not remaining level, I made a second turn towards my flight field and convexly the model also beat with gas, I put the model in manual and everything seemed to be fine. unfortunately not wearing glasses I could not see artificial horizon rotating, putting the model back in fbwa unfortunately everything came to life. I’ll put logs and videos on it. recovered the fc model was still attached to its base was not detached repairable model is not the first model I do, but the first problem of this type. I noticed in the osd video that just after launched I have an imu usage message. also a height overhang.
drive link to osd video and log file
https://drive.google.com/drive/folders/1dMc9EwF0NvF2CIikiXCcBqwlKLtr44_L?usp=sharing
thx for your help
Posts: 2
Participants: 2