When the Radio control is turned off, the server on the aircraft will act on...
@blue0827ww wrote: The firmware version of my drone is 4.05. I use different flight controllers,(Pixhawk and Pixhawk cube) but the problem is the same for both aircraft. Posts: 4 Participants: 2 Read...
View ArticleCompass inconsistent error after previous calibration
@Alex464 wrote: I was having an issue today at the flight field with the compasses not calibrating and giving the error “compass inconsistent” when attempting to arm the airplane. This happened after...
View ArticleSim_vehicle.py --map --console does nothing aside from printing start and...
@aerosn wrote: Hello, I’ve been trying to run SITL on windows through cygwin (as what is told in the documentation). I’ve gone through the set up in order, from downloading cygwin, clone the git,...
View ArticleAcro mode question -- use of rudder
@wkf94025 wrote: The documentation regarding Acro mode states: In the current implementation the controller won’t use rudder while the plane is on it’s side to hold pitch, which means horizontal rolls...
View ArticleFBWA vs. STABILIZE Mode
@twistedwings wrote: what’s the difference between these 2 flight modes ? I didn’t get it from the docu and flying feels almost the same. Posts: 3 Participants: 3 Read full topic
View ArticleHow to change PWM frequency for AUX Channels?
@BAmercury wrote: I want to run a brushed motor off one of my auxiliary ports on my pixhawk - but it doesn’t seem to like the Normal PWM frequency from the main channels. I read about being able to...
View ArticleClik here to view.
Flaps. Arduplane
@Antonyg wrote: Hi. My kit. FrSky Taranis Q X7S 2.4GHz ACCST 16-Channel Transmitter Carbon Fibre FrSKY XSR-M 16-Channel Receiver Matek F765-Wing flight controller. This will go into a fixed wing...
View ArticleClik here to view.
Rangefinder voltage spike issue. How do I filter the signal to use for Autoland?
@dodobird wrote: I’m using the SF11B laser rangefinder for a fixed-wing aircraft connected to a Pixhawk 4 board via ADC. I want to use this rangefinder for altitude sensing for Autoland, however I’m...
View ArticleChange default behavior when GPS signal is lost
@vikutis wrote: Hello, How to change plane default behavior when GPS signal is lost. I have plane with px4 Posts: 2 Participants: 2 Read full topic
View ArticleGet_vector_perpendicular requires vec_neu?
@skybound wrote: Howdy all, In AP_Avoidance.cpp, line 610, the get_vector_perpendicular function is defined. This function requires two inputs; obstacle (makes sense, we are trying to avoid an...
View ArticleNew Frame Testing in Sitl
@PotatoesLegend wrote: Hey everyone, I’m trying to make my own frame and test it in Sitl first. I’ve made a new frame class and frame type in the file “AP_MotorsMatrix” and also add this frame class...
View ArticleCopter's GPS_GOOD_HDOP and radius geofence in Plane
@maciek252 wrote: Hi everybody, I can’t find in the docs, could you please clarify the following problems: -is there a parameter in Plane with a functionality similar to Copter’s GPS_GOOD_HDOP? Where...
View ArticleClik here to view.
Fails with FBWB mode
@TRINH_PHUNG wrote: Helo guys, I have normal fly (Delta wing) with FBWA mode without Airspeed sensor . But when i switch to FBWB, Plane will increase throttle and pitch up, It’s not hold alitutude...
View ArticleUnhealthy GPS Signal
@BGordon wrote: Hi there, I’m new to Ardupilot/RC flying in general. Please let me know if I’m not posting this in the right board. We’re getting the error message “Unhealthy GPS Signal” in Mission...
View ArticleROLL rotation error during VTOL transition
@Sung_Yoon wrote: I had a normal flight in front, but the same problem occurs. The two changes were the second aircraft and the second FC. X-UAV pixhawk2.4.8 ver4.0 20200801.param (16.8 KB) Posts: 4...
View ArticleSerial7 parameters unavailable in mission planner
@know1 wrote: I’m trying to configure frsky smartport telemetry on my matek f765, but there are no SERIAL7 parameters available in ardupilot through mission planner. While I could move the receiver...
View ArticlePlane performs unwanted climb on RTL - only if far away from home location
@o_zoeller wrote: Hi guys, we’ve done some BVLOS flights with a Foxtech Nimbus VTOL (ArduPlane V4.1.0dev (c6f12e51)) last week using terrain data loaded on the MicroSD of the Pixhawk. Terrain...
View ArticleIs it possible to determine V speeds automatically?
@iter wrote: Is it possible to determine V speeds automatically for a given airframe? Vx, Vy, Vstall, Vmaxthrottle, etc? It would be helpful in its own right, but also for parameters that depend on...
View ArticleClik here to view.
How to force pitch AUTOTUNE?
@iter wrote: I’m trying to auto-tune a Bixler airframe. It’s not so interesting tuning a Bixler; I’m doing this to understand how the process works so I can apply it to less common airframes. I was...
View ArticleClik here to view.
RCIN in auto mode?
@Arnd_FF wrote: Why is there a change in RCIN when I am on an auto mission? Sometimes but not always this leads to massive RCOUT levels. In this case, my plane flew a barrel roll and then recovered....
View Article