PrecisionHawk Lancaster & Mission Planner
@Edu1 wrote: Hello Group, I recently got a second hand Lancaster 5, but without the RC ground control box, so I can’t connect to Mission Planner, there is any step by step tutorial around here or...
View ArticleEsc calibration, no beeps Lipo cell number
@Doppler_uav wrote: Hi, I have a twin motor plane. I did the Esc calibration as usual (Escs connected directly to the receiver), and the motors seem to spin normally after armed, but the strange thing...
View ArticleQuestion about SIM_JSBSim interface between SITL and JSBIM
@linuxguy123 wrote: Quick question… am I to understand that the ONLY information going from an arduplane SITL session and JSBSim is the servo outputs via send_servos ? No other control information is...
View ArticleUsing a transmitter with a SITL session?
@linuxguy123 wrote: Is there a way to connect a transmitter to the arduplane process being run as SITL ? Posts: 1 Participants: 1 Read full topic
View ArticleClik here to view.
Plane 4.0 UAVCAN output rate inconsistency
@tomalxreed wrote: Hello, I am having issues due to an inconsistent UAVCAN ArrayCommand output rate. This is an issue for me because I have a downstream component that implements a timeout, used to...
View ArticleHow to setup 1000 mw power on my 3dr 1000 mw telemetry?
@kishang56 wrote: Hello, I got a pixhawk 2.4.8 and 3dr 1000mw telmetry. the problem with the telemetry is that i can only set sik radio power up to 20(100 mw) under initial setup. how to set power to...
View ArticleLoad two missions at once and switch with rc channel
@kanord wrote: Hello everyone, I have a question for the community. I would like to load 2 or more missions on my plane, I explain: I would like to load my mission, but in case of having to land early...
View ArticleArduplane 4.0 - Library Example AP_Logger_test.cpp is not working, no log...
@sdeal3 wrote: I am currently trying to learn how to set up custom log files within the Ardupilot code. I want to be able to manually record the flight sensor data, like the magnetometer orientations,...
View ArticleHere+ RTK with Pixhawk 2 Cube for PPK data processing.
@Blackbird1952 wrote: Hello Everyone, I’m Using pixhawk 2 cube and HERE+ RTK setup for flying. I want to covert RTK data in PPK data any suggestion for this process? Also when I’m flying my plane with...
View ArticleClik here to view.
Why would DesRoll command so wildly?
@TianChang_Yonah wrote: Hello people! Yonah team has been out testing again. We managed to integrate another aircraft following our success from here , calling it Nemo5. We’ve been happily testing...
View ArticleClik here to view.
Pixfalcon vibration damping
@Rafi wrote: I was using pixfalcon on my 62cc gas engine.I mounted it on a damped box with 3M double sided tape.When I reviewed the log it shows extreme vibration in Z axis. X and Y were fine.I...
View ArticleClik here to view.
Landing flare in FBWA mode
@maciek252 wrote: Hi, I fly an XUAV Clouds with a pixhawk running ArduPlane. Had loads of problems with flying at the beginning. The drone crashes when flown in Manual/Stabilize. I don’t know why it...
View Articlespecifying the rudder angle
@111192 wrote: Sorry for the machine translation, I am a Japanese student. I would like to use Ardu plane for my research, but I don’t know how to specify the rudder angle of the plane in the flight...
View ArticleArduplane autoland
@JeyPi wrote: Hi I am not able to get successful autoland result. Am I overlooking something? Can someone help? The plane is a Twin engine AlbaBird...
View ArticleArduPilot Tune for BLHeli32 ESCs
@mike_d wrote: Don’t have a buzzer in your build but you still want to represent ArduPilot? I made the ArduPilot startup tune (as close as I could) as a startup song for BLHeli ESCs. When you connect...
View ArticleDelete this not right
@mpir wrote: (topic withdrawn by author, will be automatically deleted in 24 hours unless flagged) Posts: 1 Participants: 1 Read full topic
View ArticleAHR2.Alt glitch? Airplane suddenly lose altitude
@aldofad wrote: Dear users, I’m using Arduplane V4.0.2 in a Pixracer 15. Yesterday during a CRUISE flight the plane suddenly lost altitude while at the same instant I saw the altitude reported by...
View ArticleClik here to view.
Gooney Bird! (large quad plane)
@Illini_Rob wrote: After several years of limited progress, a friend of mine and I are pushing forward on my long endurance UAV project. VTOL booms have been added and engine testing is ongoing. I...
View ArticleFuel Flow Sensor with cube black
@Aeroenggguy wrote: I have a Jeti MFlow2 Fuel Flow Sensor that i am trying to integrate with cube black in the documentation i found this...
View ArticleSuggestion for a 900mm wing built
@Thieaux wrote: Hey guys, newbie here, im new to the whole FC scene, but not to the hobby. Lets put it this way, the last time i flew my plane i had to swap crystals…enough said. So i saw some videos...
View Article