QuadPlane not working in RF9
@Fanman wrote: Hi All Have been using ArduPlane and ArduCopter with RF9 on a Windows machine and SITL on another Linux machine. Works fine for Plane and Quadcopter. Problem: When I try to run...
View ArticleAir speed error then crash
@Gus7119 wrote: Every single one of my crashes had this symptom. Airspeed goes crazy and control lost. I’m either doing something fundamentally wrong with my builds/configs or there is a serious issue...
View ArticleHow do I get the plane to just stabilize
@ivan_viti wrote: I have an APM 2.8 ardupilot board. I can get it to route flight commands from the receiver through the flight controller and on to the servos/esc. All I really want is for it to help...
View ArticleEkf2 is using gps
@TheTroll wrote: Could you please explain what system message Ekf2 imuo is using gps On osd means? Thanks! Posts: 1 Participants: 1 Read full topic
View ArticleClik here to view.
More servo channels
@KarolNi wrote: G’day mates I’m working on gasoline octoplane (quadplane with 8 rotors - something like Porter). I’m using Cube as autopilot. Currently I use 12 output channels as primary flight...
View ArticleClik here to view.
Just a noob that needs help getting started
@Hackman wrote: hi my name is Simon and i need help getting started i want to get started with ardupilot but I have no idea where to jump in I have been interested in planes and autopilot for a long...
View ArticleTriggering events on aux channel input
@Harry_Herring wrote: I’m working on a rather odd project where I’ve got an Arduino microcontroller that has a servo output on a certain event happening, I want to log this into the pixhawk I’m using...
View ArticleAux PWM Passthrough from RC Channel
@Marc_Dornan wrote: Using Plane how do I map say SBUS Input Channel 10 to AUX1 PWM? I know this must be a basic question. I do not want to run a PWB servo cable from the RC receiver but want to do it...
View ArticleAny sound changes in new firmware (plane 4.0.0)
@SWARNA_MOHAN_CHANDRA wrote: In ardupilot plane firmware any pixhawk sound change is there? Posts: 1 Participants: 1 Read full topic
View ArticleNo contact between pixhawk and Rx after load 4.01
@wazoo22 wrote: Hello all. weird stuff today. I’m using a pixhawk with latest MP. and ppm 12 channel, Graupner GR-24 Rx and mx-20 Tx. I installed 4.01 and MP says, “no RC”. Rx/Rc works fine driving a...
View ArticleHow to make camera triggering cable for the sony Alpha 6000
@akhil wrote: I am using sony alpha 6000 for the mapping services. can anyone pls tell me where I can find the cable for triggering and tell me the process to trigger the camera after regular time...
View ArticleCompass calibration with stick combination
@giacomo892 wrote: I’m trying to calibrate my plane compass at the field using the full throttle + right yaw for 2 seconds combination. I don’t get any messages on the OSD nor a buzzer beep when...
View ArticleAuto Grid Following Problem
@akhil wrote: We are using pixhawk cube for mapping and we deploy the auto grid mission in it and we are using song alpha 6000 for capturing images. During the auto survey grid mission plane follows...
View ArticleFlying without radio
@TheTroll wrote: (topic withdrawn by author, will be automatically deleted in 24 hours unless flagged) Posts: 1 Participants: 1 Read full topic
View ArticleClik here to view.
Holybro Durandal user experience in Bixler 2
@GeneralJumbo wrote: I have been using the Holybro Durandal Flight Controller for over a month and I’m really impressed. My plan with this Durandal / Bixler build was to build a reliable and...
View ArticleClik here to view.
From a simple cockpit indication to ArduPilot
@miniflyer wrote: Hello Community… It all started as a fairly simple project…for a scale model of an F-4 Phantom in 1/6 scale i wanted to build a small functional ADI (Attitude Direction Indicator)....
View ArticleClik here to view.
Strange QRTL climb after upgrading to 4.0
@foxtech wrote: drive.google.com 00000010 strange climb up after Qrtl.BIN Google Drive file. our Nimbus VTOL , after upgrade to 4.0.0 firmware we turned on Qrtl, and normally when RTL was triggered,...
View ArticleSpectrum DX8 no connection to Pixhawk2.1
@bnaikelis wrote: Hi guys, I’m at my wits end trying to get my DX8 gen 2 to communicate with the Pixhawk 2.1 black cube. The bind process works fine, all lights flash rapidly then go solid when bound....
View ArticleClik here to view.
New Takeoff mode skipped for circle just after launch
@urlu75 wrote: Hi, I just give a try to the new way of auto takeoff and could not make it happened. “old way” with auto mode and a mission is perfectly working. Plane is launched by hand, the motor...
View ArticleFlight mode can not be changed
@yumurtaci wrote: Hello everyone, I have been trying to configure my Pixhawk but i have an issue with flight moding. I have changed and saved the flight modes in the configuration tab and when I use...
View Article