Clik here to view.
VTOL Deca (Google Wing) frame type
@Dronedown wrote: Hey guys, I’m wanting to build a craft similar to this the google wing delivery service fixed wing. It has 12 horizontal motors for lift and 2 front facing motors Pictured here...
View ArticleHydrofoiling Sailboat Flight Control
@ustaluvher wrote: This is my first post here team, so be gentle. I have built quad and tricopters before and had success with the APM and Mission Planner family. I also like to sail and race foiling,...
View ArticleWill PayPal someone to walk me through setting up my Delta/PixHawk Cube
@MrDysprosium wrote: I’ve owned the PixHawk Cube for 3 weeks now, and have spent countless nights staying up way passed the time I should be in bed just trying to get “Manual” to work right on my...
View ArticleClik here to view.
VTOL, Tri Tiltrotor, Right yaw during Transition, Strange DesYaw in Log
@lorbass wrote: During the transitions QHover to FBWB or QStabilize to FBWA the Skywalker Wing turns 10 to 30 degrees right. While analizing the log, I discovered that the ATT.DesYaw shows Zero exept...
View ArticleAirspeed sensor (and FC) for high speed application
@ufoDziner wrote: Hello, I’m attempting to setup arduplane for some dynamic soaring use. Currently I’m testing with a revolution mini. I have an analog airspeed sensor ( MPXV7002DP) that I’d like to...
View ArticleClik here to view.
Plane rolls off course on auto takeoff
@Sazabi wrote: Hello, Could you, please, help me understand the reason my plane (wing type) rolls sideways (usually to left) on catapult auto launches? It starts to roll left after motor starts up....
View ArticleAbout source code of Ardupilot (ArduPlane)
@nakamura-shun wrote: Hello, I’m a university student in Japan. I am researching on automatic control of fixed wing UAV, and I want to experiment with Pixhawk. Specifically, I’m going to add a flight...
View ArticleBoard makes strange turn on takeoff
@thw0ng wrote: Hello, I used source code from repository (ver 3.9.8) to compile firmware build for my Pixhawk4. From the moment I have started to use custom build version (instead of official) my...
View ArticleAcro mode control deflection
@ufoDziner wrote: Hello, I’ve setup a couple of planes to use Manual and Acro modes, and have noticed some odd control surface behavior when in Acro mode. When in Manual the control surfaces move...
View ArticlePixhawk Cube + Here2 GPS, always solid red. Help?
@MrDysprosium wrote: My Here2 will flash red, then go solid red when I press the button. APM Arming fails on “GPS Lock”, yet when I look at the GPS status I have 12+ satellites connected and am...
View ArticleAcro_Lock Flight Mode (feature request)
@ufoDziner wrote: Hello, Would it be possible to have the Acro_Lock functionality as a selectable Flight Mode, rather than having to connect to the Mission Planner to enable/disable? So, Acro, and...
View ArticleDeactivate servos of ailerons
@Paola_Casabona wrote: I have a VTOL X8 and I have the next configuration: MAIN1: motor 1 MAIN2: motor 2 MAIN3: motor 3 MAIN4: motor 4 AUX1: Left elevon AUX2: Right elevon AUX3: Motor I need to have...
View ArticleClik here to view.
VTOL flip after takeoff, EKF yaw reset
@snakeeater wrote: Today wanted to do the first flight with this new build, but it didn’t get very far. 7kg VTOL Glider configured as XQuad Cube + Herelink + Plane 4.0 After going through the...
View ArticleEagletree Airspeed sensor V3 (feature request)
@ufoDziner wrote: I’ve seen that there was support for the Eagletree Airspeed sensor V3 sensor before, and that it might have just been overlooked. Would it be possible to add support for it back into...
View ArticleClik here to view.
Super heavy duty vtol aircraft
@shiyu111137 wrote: Need to contact wyq5765@gmail.com QQ图片20191019100727.png378×545 307 KB QQ图片20191019101413.png819×215 176 KB Posts: 1 Participants: 1 Read full topic
View ArticlePIX4 Skyhunder throttle failsafe not triggered
@mauritzg wrote: Hi guys. Hope someone can help me. Today my Skyhunter did not failsafe after loss in RC i.e. LOW PWM on channel 3. If I did not have FPV the plane would have been lost. I’m attaching...
View ArticleElevator channel twitching with Throttle input in all Stabilized flight modes
@Jordan_Brock wrote: I checked the servo output, and it is not just the servo, the Elevator output actually starts moving and bounces around in every controlled flight mode (doesn’t happen in Manual...
View ArticleNo matter any combination of Servo1/2 & RC1/2 reversal and elevons,...
@MrDysprosium wrote: Mission Planner is proving to be a huge pain when it comes to elevon/vtail… Anyway, I see a few threads on this same question go mostly unanswered. My current setup: TX: No...
View ArticlePixhawk Mini 3DR
@RizHass wrote: Hi, Background: I have been flying my fixed wing with Pixhawk Mini using QGC, but the mission mode is hit and miss. So I decided to flash it with Arduplane FW, and now I am using...
View ArticlePitch oscillations
@akimata wrote: Hi, I’ve recently maidened my new Talon and if flew pretty great but the log show up some weird oscllations on pitch axis. I’m pretty sure CG is the right spot as it is most...
View Article