@kerrycorcoran wrote:
MFE Believer
Matek F765 Wing Flight Controller
Arduplane 4.1.0 (dev)Had been flying the aircraft since the start of summer with no issues; airframe had approximately 15 or so flights.
This particular flight I went out, flew over a small lake and flipped RTL. RTL engaged without issue and the aircraft made its way back home. All was working fine and I had to adjust my goggles (DJI FPV Goggles V2), so I popped off the goggles, looked and saw the aircraft overheard. I noticed it seemed to be heading down at a steeper angle so I was putting on the goggles to check the OSD and flip into FBWA or Manual, but by that point it had hit the ground.
I have since powered everything on and checked that I still have fully operational control surfaces; I was checking to validating that the servos were functioning properly.Anyone able to review the BIN file and help me to understand what went wrong?
BIN File
Posts: 1
Participants: 1