Quantcast
Channel: ArduPlane - ArduPilot Discourse
Browsing all 7817 articles
Browse latest View live

Image may be NSFW.
Clik here to view.

Hard landing causes all parameters to be reset to defaults?!?

@iforce2d wrote: About a year ago I set up a flying wing and spent a couple of days tuning and tweaking, since then it has given me 20+ hours of beautiful flight. Today as I threw it the prop adapter...

View Article


BUG Height just keeps increasing at loop point. SITL Linux

@josheeg wrote: BUG Height just keeps increasing at loop point. SITL Linux Ubuntu 18.10 I create a VTOL Mission just Vtol takeoff to a height 250 ft increase 25 ft to 400ft in a circle then back down...

View Article


VTOL Mission loop after drawing the mission altitudes vtol takeoff and...

@josheeg wrote: VTOL Mission loop after drawing the mission altitudes vtol takeoff and waypoints heigher by 25ft keeps going up at loop wp? Posts: 2 Participants: 1 Read full topic

View Article

"runsim.py" script import error in HIL simulation

@thethaibinh wrote: When I tried to run HIL with sim_vehicle.py script with parameter: sim_vehicle.py -L KSFO -v ArduPlane -f quadplane --console --map --hil This lead to run runsim.py and I got an...

View Article

Second gps on uart4, ESC on uart5

@wazoo22 wrote: I’m trying to use a second GPS (identical to first- BN880) on uart4, and ESC telemetry on uart5. I’ve read the section on GPS blending (aka second gps) and set the parameters they...

View Article


Image may be NSFW.
Clik here to view.

Servo_Auto_Trim always enable?

@Lbarreiro wrote: Hi all, Read somewhere that for foam planes it´s good idea to keep de servo_auto_trim always enable. As i was analyzing (not searching for nothing, only learning to ) the last 2...

View Article

PID servo gimbal

@jesus_taax wrote: Hello, I want to change de values of the PID controller in the servo gimbal, anyone knows where is it in the code? Thanks jesus Posts: 1 Participants: 1 Read full topic

View Article

Twin Gas Engine RPM & Temperature Sensor

@MerkaTony wrote: Hello Mindhive, I am at the moment on a twin gas engine project that requires Engine RPM and temperature sensing. has anyone been able to make it work and if yes, with which sensors?...

View Article


Image may be NSFW.
Clik here to view.

Plane 3.9.5 release

@tridge wrote: ArduPilotPlane.jpg750x291 33.1 KB The ArduPilot development team is pleased to announce the first beta of the 3.9.5 release, 3.9.5beta1. The changes in this release are: fixed...

View Article


GPS:No Fix....but there is a fix shown?

@RogerR wrote: FC=F405 Wing GPS=Hollybro Micro Mini (M8N) Running ArduPlane 3.9.4. I’ve tried UART3, UART5, and UART6. I’ve tried 115,200 and 38,400 Baud. Tried two different GPS units (both of the...

View Article

Running a DO set servo comand for channel 1 (Ailerons) in auto mode am I crazy?

@Brian_Duvall wrote: Hello all, I am hoping someone can help me with this. I am running a python script to fly my plane. When the plane is in auto mode I want to momentarily do a do set servo command...

View Article

Servo output stops in FBW modes after GPS lock

@brad112358 wrote: After powering on and switching to FBWA mode, I see all the expected servo response when moving the airframe (A small foam flying wing) Later, a few seconds after obtaining a GPS...

View Article

Image may be NSFW.
Clik here to view.

Airspeed Sensor Calibrating

@Lbarreiro wrote: Hi I have install the airspeed sensor and made a flight to calibrate it as showed in the wiki (loiter for 5m with ARSPD_AUTOCAL = 1) This is the graphic from that flight - First the...

View Article


What's the last working version of HITL Sim and Mission Planner

@texram wrote: I read some threads that mentioned HILT is no longer available in the new firmware. Does anyone know what the last working version of HITL Sim and Mission Planner were? I want to use...

View Article

Running out of serial connections

@Verloop wrote: We are using 5 serial devices on the Cube: GPS Emlid reach PPK Telemetry Lidar Ping ADS-B receiver But only 4 serial ports are available. How to solve this problem? In other words,...

View Article


L/d test flight

@jace26 wrote: I’d love thoughts on how to best accomplish an l/d test flight in Auto mode. current thought process would be to have the aircraft descend from a higher point to a lower one and observe...

View Article

Port hog: buzzer

@jace26 wrote: I want my usb serial port back, but I don’t want to ditch the buzzer. Would it be possible to drive the buzzer from a servo port? I know the code doesn’t support this right now but is...

View Article


Mission planner refuses to write waypoints loaded from a WP file

@Karthik_A wrote: I run the latest stable version of the mission planner and use AP3.8. The plane refuses to accept ‘write WP’ commander even though the Home position is set and locked. The plane...

View Article

Image may be NSFW.
Clik here to view.

RPLIDAR A3 is not working connect TEL1 (no rotating)

@juibn wrote: hi. i`m follow this page: http://ardupilot.org/copter/docs/common-rplidar-a2.html#common-rplidar-a2 RPLIDAR A3 is not rotating. RPlidar A3.jpg960x540 150 KB Is there anything I missed?...

View Article

Unable to build JSBSim source on Windows using Cygwin

@ujjwalrathod007 wrote: I am trying to build JSBSim sources on the following webpage. I have already configured sitl simulator and wanted to run JSBsim with it....

View Article
Browsing all 7817 articles
Browse latest View live