@andyp wrote:
Hi. Black Cube on a mini carrier board. Firmware Plane 4.0.9 official.
Trying to use Telemetry2 for Light Weight Telemetry output. So that’s Serial2 - set to 9600 baud (have also tried 1200, 2400), and protocol to 25.
Analyzing the second pin (the pin beside VCC) - which should be Serial2 Tx - and I see nothing.
I have used Light Weight Telemetry on other boards (eg OmniBus F4) no issue.
Any ideas? Thank you!
Posts: 1
Participants: 1