@Takedeadaim wrote:
I am using a Matek 405 Wing and a Spedix GS30 BL_32 ESC. I set SERVO_BLH_AUTO =1 and SERVO_BLH_MASK =3 (Ports S1 &S2) ESC and motor are connected to ESC1 and signal with ground wire to S1.
I was not able to bring up MOT_PWM_TYPE or Q_M_PWM_TYPE to set those to 4 (Dshot 150)
When I connect with BL Heli 32 Suite it connects but I when attempting to read the setup I get an error “Found no valid ESC configuration”
Posts: 1
Participants: 1
